{"title":"High Selling Electrical","description":null,"products":[{"product_id":"iwiss-deutsch-connector-crimping-tool-kit-for-deutsch-dt-connectors-solid-stamped-contacts-delphi-weather-pack-crimper-deutsch-pin-removal-tool-kit-12pcs","title":"Deutsch Connector Crimper Kit for Deutsch DT Connectors, Solid \u0026 Stamped Contacts, Delphi Weather Pack Connectors","description":"\u003csection id=\"ic-sales-decision-v1\"\u003e\u003ch2\u003eChoose the toolkit around the contacts you actually use\u003c\/h2\u003e\n\u003cp\u003eFor vehicle wiring repair, equipment maintenance and custom harness assembly.\u003c\/p\u003e\n\u003ch3\u003eChoose the right configuration\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eKIT-DC01 and KIT-DC02 have different contents. Solid contacts need indent tooling; stamped contacts need the appropriate open-barrel tool. Contact size and AWG are different specifications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eComplete the harness, not a second toolkit\u003c\/h3\u003e\n\u003cp\u003eList your connector housings, contact part numbers and wire gauges before choosing. Add connector refills only after matching solid or stamped contact construction.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003eGet a model and application check before ordering\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"ic-independent-guide\"\u003e\u003ch2\u003eAre solid and stamped contacts the same job?\u003c\/h2\u003e\n\u003cp\u003eNo. A solid contact has a closed barrel that is indented around the conductor. A stamped contact has open wings that must be formed around the wire and, where required, the insulation.\u003c\/p\u003e\u003c\/section\u003e\u003ch2\u003eDeutsch connector crimping tool kits\u003c\/h2\u003e\u003cp\u003eCompare KIT-DC01 and KIT-DC02 by the selected configuration and kit image. They have different contents.\u003c\/p\u003e\u003ch3\u003eKIT-DC01 tooling\u003c\/h3\u003e\u003cp\u003eIWD-12, IWD-16 and IWD-20 tools are for the corresponding solid-contact sizes. IWC-1424A serves appropriate stamped open-barrel terminals; IWC-1424B serves the listed Weather Pack and Metri-Pack applications. Match the contact part number, wire range, terminal geometry and seal requirements to the individual tool.\u003c\/p\u003e\u003ch3\u003eCheck before ordering\u003c\/h3\u003e\u003cp\u003eContact size is not AWG. Connector family alone does not confirm tool fit. Follow the terminal manufacturer's preparation, crimp inspection and retention requirements. The tool alone does not establish a waterproof rating or third-party certification.\u003c\/p\u003e\u003csection id=\"ic-wire-preparation\"\u003e\u003ch2\u003eMatched cutting \u0026amp; stripping tools\u003c\/h2\u003e\n\u003cp\u003eFor a toolkit missing wire-preparation tools, use HS-D2 only for compatible 0.5–6 mm² wires. Check the selected KIT-DC01 \/ KIT-DC02 package first and skip any cutter or stripper already supplied. Smaller wires require different stripping tooling.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px\"\u003e\n\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/hs-d2-automatic-electric-wire-cable-stripper-stripping-tool-pliers-multi-function?variant=43146335977633\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/WireCableStripper.1.jpg?v=1701325888\" alt=\"HS-D2 wire stripper\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eHS-D2 wire stripper\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eFor routine stripping of compatible plastic\/rubber insulation. Use this recommendation for 0.5–6 mm² wire; check actual wire and insulation before use. Its auxiliary crimp function does not replace your terminal-specific crimper.\u003c\/p\u003e\u003c\/article\u003e\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/icrimp-wire-cutter-shear-cut-electricians-cable-cutting-pliers-up-to-3-gauge-wires-compact-style?variant=43128467128481\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/Wire_Cutter_ICP-206-793966.jpg?v=1732520913\" alt=\"ICP-206 cable cutter\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eICP-206 cable cutter\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eFor soft copper up to 3 AWG or aluminum up to 4 AWG. Not for steel, ACSR or hard-drawn copper. Cutting capacity does not establish crimping compatibility.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eOptional purchases:\u003c\/strong\u003e check your selected kit contents and skip tools already included or owned. Work on disconnected conductors, test stripping on a sample and use the terminal manufacturer's specified strip length. These accessories are not automatically included with the crimper.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"KIT-DC01","offer_id":42737934368929,"sku":"KIT-DC01","price":140.99,"currency_code":"USD","in_stock":true},{"title":"KIT-DC02","offer_id":42737934401697,"sku":"KIT-DC02","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/DC01.jpg?v=1755125339"},{"product_id":"icrimp-icp-240-cable-stripper-for-awg-12-to-4-0-round-cables-radial-wire-stripper-with-2-extra-blades","title":"ICP-240 Wire Stripper for AWG12 to 4\/0 Round Cables, Radial Cable Stripper with 2 Extra Blades","description":"\u003cdiv class=\"ic-merged-content\" data-ic-content-version=\"amazon-2026-10\"\u003e\n\u003ch2\u003eICP-240 Wire Stripper for AWG12 to 4\/0 Round Cables, Radial Cable Stripper with 2 Extra Blades\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eICP-240\u003c\/strong\u003e — review the application, configuration and working range below before ordering.\u003c\/p\u003e\n\u003csection class=\"ic-preserved-details\"\u003e\u003cdiv class=\"ic-full-description product-description rte\"\u003e\n\n\u003csection class=\"ic60-details\" id=\"ic60-selection\"\u003e\u003ch2\u003eICP-240 radial cable stripper\u003c\/h2\u003e\n\u003cp\u003eRemove jacket material using radial or longitudinal cuts on suitable round cable.\u003c\/p\u003e\n\u003cdl\u003e\n\u003cdt\u003eSize \/ application\u003c\/dt\u003e\n\u003cdd\u003eListed cable range: AWG 12 to 4\/0\u003c\/dd\u003e\n\u003cdt\u003eConfiguration and contents\u003c\/dt\u003e\n\u003cdd\u003eRadial stripper with two extra blades.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003cp class=\"ic60-check\"\u003e\u003cstrong\u003eBefore you choose:\u003c\/strong\u003e Check cable outside diameter and insulation construction. Set blade depth on a sample to avoid cutting conductor strands.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003ePreparation and inspection\u003c\/summary\u003e\u003cp\u003eWork on disconnected conductors. Match the cable construction, set the strip length and test the blade action on a sample. Inspect for nicked or missing strands before preparing the rest of the batch.\u003c\/p\u003e\u003c\/details\u003e\u003cp class=\"ic60-support\"\u003e\u003ca href=\"mailto:sales@iwiss.com?subject=ICP-240+Wire+Stripper+for+AWG12+to+4%2F0+Round+Cables%2C+Radial+Cable+Stripper+with+2+Extra+Blades\"\u003eAsk us to confirm your setup\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSend the exact fitting or terminal part number, size and selected tool model. For powered equipment, include the supply specification and intended workload.\u003c\/p\u003e\n\n\u003c\/section\u003e\n\u003c\/div\u003e\n\n\n\n\n\n\n\n\n\u003ch3\u003eAbout this item\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire Stripper: ICP-240 larger size cable stripper is designed to remove wire insulation of AWG12 to 4\/0 battery cables, welding cables, stranded cables or solid cables.\u003c\/li\u003e\n\u003cli\u003ePractical Functions: ICP-240 radial cable stripping tool performs circular and longitudinal cuts with easily rotation body, it makes longitudinal cuts for end stripping and circular cuts for jacket removal.\u003c\/li\u003e\n\u003cli\u003eDurable \u0026amp; Replaceable Blade: Two extra blades are included to increases tool lifespan. Tempered steel ground blades stay sharp even with extensive use, provides smooth rotation during use.\u003c\/li\u003e\n\u003cli\u003eErgonomic Designs: The cutter will automatically adjust to the cable size and lock in place in order to perform radial cuts. The product possesses blades housed in a reinforced polymide casing contoured to fit comfortably into the hand for extended periods of use encountered in electrical assembly industries.\u003c\/li\u003e\n\u003cli\u003eApplications: Can cut through a variety of jacket materials such as PVC, rubber, PE, and many more. Ideal for electrical, automotive and DIY applications. The choice of electricians.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003ch3\u003eICP-240 — specifications\u003c\/h3\u003e\n\u003cdiv class=\"ic-table-scroll\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Dimensions\u003c\/th\u003e\n\u003ctd\u003e3.86\"L x 1.16\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHandle Material\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eItem Dimensions L x W\u003c\/th\u003e\n\u003ctd\u003e3.86\"L x 1.16\"W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eItem Weight\u003c\/th\u003e\n\u003ctd\u003e0.07 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrip Type\u003c\/th\u003e\n\u003ctd\u003eErgonomic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003csection class=\"ic-selection-note\"\u003e\u003ch2\u003eCable stripping selection\u003c\/h2\u003e\n\u003cp\u003eCheck both cable outside diameter and insulation type. Make a trial strip on an offcut and inspect the conductor before working on the final termination.\u003c\/p\u003e\u003c\/section\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eWhat should I check after stripping?\u003c\/summary\u003e\u003cp\u003eLook for cut strands, nicks and insulation damage. Adjust the tool to the cable and follow the cable and terminal preparation instructions.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eHow can I confirm the right model before ordering?\u003c\/summary\u003e\u003cp\u003eEmail \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e with the model, application, component size and a photo or part number. For delivery and returns, see our \u003ca href=\"\/pages\/shipping-and-delivery\"\u003eshipping information\u003c\/a\u003e and \u003ca href=\"\/pages\/return-and-refunds\"\u003ereturns policy\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"iCrimp Tools","offers":[{"title":"ICP-240","offer_id":43128437866657,"sku":"ICP-240","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/1_2abc6e2f-f774-468c-89aa-125d6bfac038.jpg?v=1716431413"},{"product_id":"iwiss-battery-cable-lug-crimping-tool-for-8-6-4-2-1-1-0-awg-heavy-duty-wire-lugs-battery-terminal-copper-lugs-with-wire-shear-cutter","title":"HX-50BI Hex Lug Crimper \u0026 Cable Cutter Kit, 8–1\/0 AWG","description":"\u003csection class=\"ic-lug-product\"\u003e\u003cp\u003e\u003cstrong\u003eChoose the HX-50BI + LK-60A kit for crimping and cutting, or the LK-60A cutter-only option.\u003c\/strong\u003e The cutter-only price does not include a lug crimper.\u003c\/p\u003e\n\u003ch2\u003eCheck the package selector\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eSupplied tools\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHX-50BI + cutter\u003c\/th\u003e\n\u003ctd\u003eHX-50BI crimper and LK-60A cable cutter\u003c\/td\u003e\n\u003ctd\u003ePrepare and crimp compatible battery cable lugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLK-60A — cutter only\u003c\/th\u003e\n\u003ctd\u003eCable cutter only; no crimper\u003c\/td\u003e\n\u003ctd\u003eReplace or add a cable-cutting tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch2\u003eHX-50BI crimper: six marked hex sizes\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e8, 6, 4, 2, 1 and 1\/0 AWG.\u003c\/strong\u003e Built-in rotating dies let you select the matching position without a separate loose die set. Manual lever action forms a hexagonal crimp on compatible copper tubular lugs.\u003c\/p\u003e\n\u003ch2\u003eLK-60A cutter: prepare the cable end\u003c\/h2\u003e\n\u003cp\u003eThe shear-style cutter is listed for \u003cstrong\u003ecopper and aluminum cable up to 1\/0 AWG\u003c\/strong\u003e, subject to cable construction. It is \u003cstrong\u003enot for steel or ACSR\u003c\/strong\u003e. The cutter's aluminum capability does not establish that the HX-50BI crimper is approved for aluminum lugs.\u003c\/p\u003e\n\u003ch2\u003eApplications and crimp quality\u003c\/h2\u003e\n\u003cp\u003eFor compatible vehicle battery cables, RV leads, generator cables and equipment ground connections. Cut squarely, strip to the lug maker's length without damaging strands, insert fully and crimp with the specified cavity and locations. Inspect the first sample and perform required dimensional or pull-force checks.\u003c\/p\u003e\n\u003ch2\u003eChoose the right setup\u003c\/h2\u003e\n\u003cp\u003eAlready own a cutter? Compare \u003ca href=\"\/products\/iwiss-battery-cable-lug-crimping-tool-for-heavy-duty-copper-wire-lugs-battery-cable-ends-from-awg-8-1-0-ground-lug-cimper-tool\"\u003eHX-50BI \/ HX-50B tool-only options\u003c\/a\u003e for AWG or metric dies. Need stripping tools as well? Compare \u003ca href=\"\/products\/icrimp-iws-50bn-kit-battery-cable-lug-crimping-tool-kit-for-awg-8-1-0-electrical-lug-with-cable-cutter-stripper\"\u003eIWS-50BN tool and preparation-kit options\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eAre lugs, heat shrink and a stripper included?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eThe HX-50BI + cutter selection supplies the crimper and cable cutter. Add compatible consumables and a suitable stripper separately.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eMatch your cable, terminal and tooling\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCheck conductor material, AWG or mm² marking, strand construction and lug part number together.\u003c\/strong\u003e A stud-hole diameter identifies the mounting bolt, not the cable size. Fine-stranded battery or welding cable needs a terminal approved for that conductor construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAWG and metric labels are sizing systems, not US or European certification.\u003c\/strong\u003e Follow the terminal manufacturer's specified die, crimp profile, crimp locations and acceptance criteria. A hex-shaped result alone does not establish DIN or UL compliance.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead the battery cable, lug and crimper selection guide\u003c\/a\u003e · \u003ca href=\"\/pages\/us-metric-tool-size-guide#wire-size\"\u003eAWG and metric sizing reference\u003c\/a\u003e · \u003ca href=\"\/collections\/battery-lug-crimping-tool\"\u003eCompare all lug crimping tools\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a fit check?\u003c\/strong\u003e Send the cable marking, terminal part number, side\/end photos and expected daily workload to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"custom-lug-tooling\"\u003e\u003ch2\u003eCustom Crimping Solutions for Volume Orders\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNeed tooling tailored to your cable lugs and target market?\u003c\/strong\u003e For qualifying order quantities, iCrimp offers professional customization services to better match regional cable-lug specifications and your application’s crimping requirements.\u003c\/p\u003e\n\u003cp\u003eOur team can assess \u003cstrong\u003ecustom die geometry, size markings and tooling configurations\u003c\/strong\u003e against your terminal drawings or samples, conductor construction and required crimp profile. The aim is a better-matched crimping process for consistent, reliable connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest an engineering review:\u003c\/strong\u003e send your expected quantity, destination country, applicable standard or customer specification, terminal part number\/drawing, cable material and AWG or mm² size. Include samples or clear photos and any required crimp dimensions or test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum order quantity, feasibility, development cost and lead time are confirmed per project.\u003c\/strong\u003e Final suitability and any compliance claims depend on the agreed sample evaluation and validation; customization alone does not establish certification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"mailto:sales@iwiss.com?subject=Custom%20Cable%20Lug%20Crimping%20Tool%20Inquiry\"\u003eDiscuss your custom crimping project\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"HX-50BI + cutter | Tool kit","offer_id":43128395923617,"sku":"HX-50BI+60A","price":35.99,"currency_code":"USD","in_stock":true},{"title":"LK-60A | Cutter only - no crimper","offer_id":43846784581793,"sku":"LK-60A","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/products\/61mBDtqdw3L._AC_SL1500_c5c7ab17-b4e6-4479-8a85-9c1690a52336.jpg?v=1679383007"},{"product_id":"iwiss-ap-50bi-battery-cable-ring-terminal-crimper-for-8-6-4-2awg-copper-cable-lugs-heavy-duty-wire-lugs-and-battery-cable-ends","title":"AP-50BI Ratcheting Trapezoid Lug Crimper, 8–2 AWG — AP Tool Options","description":"\u003csection class=\"ic-lug-product\"\u003e\u003cp\u003e\u003cstrong\u003eAP-50BI crimps compatible copper or tinned-copper tubular lugs in 8, 6, 4 and 2 AWG using a trapezoid profile.\u003c\/strong\u003e AP-11 and AP-2048 are different application options; compare before ordering.\u003c\/p\u003e\n\u003ch2\u003eChoose by terminal type first\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eIntended connection\u003c\/th\u003e\n\u003cth\u003eSize information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAP-50BI\u003c\/th\u003e\n\u003ctd\u003eCompatible copper tubular battery lugs; trapezoid crimp\u003c\/td\u003e\n\u003ctd\u003e8, 6, 4, 2 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAP-11\u003c\/th\u003e\n\u003ctd\u003eCompatible removable power-connector contacts\u003c\/td\u003e\n\u003ctd\u003e15A \/ 30A \/ 45A contact groups; verify contact part number and wire range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAP-2048\u003c\/th\u003e\n\u003ctd\u003eCompatible spark-plug wire terminals\u003c\/td\u003e\n\u003ctd\u003eMaximum spark-plug wire outside diameter 8.5 mm \/ approximately 0.335 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eOnly AP-50BI carries the battery-lug range above.\u003c\/strong\u003e AP-11 contact-group amperages and AP-2048 cable outside diameter are not interchangeable with battery cable AWG ratings.\u003c\/p\u003e\n\u003ch2\u003eAP-50BI features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrapezoid crimp geometry:\u003c\/strong\u003e select only when the lug's required process permits this profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating, color-coded dies:\u003c\/strong\u003e change between four marked positions without loose dies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRatcheting action and release:\u003c\/strong\u003e controlled cycling with a release mechanism for correcting positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual, portable format:\u003c\/strong\u003e useful for matching vehicle, generator and RV cable preparations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to choose and inspect\u003c\/h2\u003e\n\u003cp\u003eMatch the copper conductor, lug barrel and selected cavity. A similar wire size does not make a trapezoid die equivalent to a hex or indent die. Prepare the conductor to the lug maker's strip length, insert fully and complete the prescribed cycle. Check terminal deformation, strand capture and required dimensions; use the specified pull-force checks for the assembly.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eCan AP-11 replace AP-50BI for battery ring lugs?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo. The AP-11 option shown is for its compatible power-connector contact groups. Use the terminal part number to verify fit.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cstrong\u003eDoes AP-2048 cut battery cable?\u003c\/strong\u003e\u003c\/summary\u003e\u003cp\u003eNo. It is the spark-plug terminal option with stripping and crimping functions. It is not the AP-50BI battery-lug crimper or a heavy cable cutter.\u003c\/p\u003e\u003c\/details\u003e\u003ch2\u003eMatch your cable, terminal and tooling\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCheck conductor material, AWG or mm² marking, strand construction and lug part number together.\u003c\/strong\u003e A stud-hole diameter identifies the mounting bolt, not the cable size. Fine-stranded battery or welding cable needs a terminal approved for that conductor construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAWG and metric labels are sizing systems, not US or European certification.\u003c\/strong\u003e Follow the terminal manufacturer's specified die, crimp profile, crimp locations and acceptance criteria. A hex-shaped result alone does not establish DIN or UL compliance.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead the battery cable, lug and crimper selection guide\u003c\/a\u003e · \u003ca href=\"\/pages\/us-metric-tool-size-guide#wire-size\"\u003eAWG and metric sizing reference\u003c\/a\u003e · \u003ca href=\"\/collections\/battery-lug-crimping-tool\"\u003eCompare all lug crimping tools\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a fit check?\u003c\/strong\u003e Send the cable marking, terminal part number, side\/end photos and expected daily workload to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"custom-lug-tooling\"\u003e\u003ch2\u003eCustom Crimping Solutions for Volume Orders\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNeed tooling tailored to your cable lugs and target market?\u003c\/strong\u003e For qualifying order quantities, iCrimp offers professional customization services to better match regional cable-lug specifications and your application’s crimping requirements.\u003c\/p\u003e\n\u003cp\u003eOur team can assess \u003cstrong\u003ecustom die geometry, size markings and tooling configurations\u003c\/strong\u003e against your terminal drawings or samples, conductor construction and required crimp profile. The aim is a better-matched crimping process for consistent, reliable connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest an engineering review:\u003c\/strong\u003e send your expected quantity, destination country, applicable standard or customer specification, terminal part number\/drawing, cable material and AWG or mm² size. Include samples or clear photos and any required crimp dimensions or test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum order quantity, feasibility, development cost and lead time are confirmed per project.\u003c\/strong\u003e Final suitability and any compliance claims depend on the agreed sample evaluation and validation; customization alone does not establish certification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"mailto:sales@iwiss.com?subject=Custom%20Cable%20Lug%20Crimping%20Tool%20Inquiry\"\u003eDiscuss your custom crimping project\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"AP-50BI","offer_id":42721483456673,"sku":"AP-50BI","price":26.99,"currency_code":"USD","in_stock":true},{"title":"AP-11","offer_id":42721476477089,"sku":"AP-11","price":25.99,"currency_code":"USD","in_stock":true},{"title":"AP-2048","offer_id":42721476509857,"sku":"AP-2048","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/products\/0_0746aba0-13eb-48bb-bf95-206e5320c7d1_1.webp?v=1676964512"},{"product_id":"iwiss-pneumatic-crimp-tool-for-16-240-mm2-cable-lugs","title":"AM-240 Pneumatic Cable Lug Crimping Machine, 16–240 mm² — Die Options","description":"\u003cdiv class=\"ic-powered-guide\" data-content-version=\"am-selection-20261031\" style=\"font-size:18px;line-height:1.7;max-width:1100px\"\u003e\n\u003ch2\u003eAir-powered crimping for larger cable lugs\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAM-240 pneumatic cable lug crimper\u003c\/strong\u003e brings foot-pedal control to repetitive power cable and large-lug assembly. Compressed air drives the crimping mechanism, reducing repeated manual handle operation at a suitably equipped workbench.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16–240 mm² listed conductor range:\u003c\/strong\u003e choose tooling for the actual cable and terminal combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoot-pedal operation:\u003c\/strong\u003e operate the machine by foot while positioning the assembly with hands clear of the dies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable tooling:\u003c\/strong\u003e select the correct crimp profile and size for the terminal manufacturer's requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench workstation setup:\u003c\/strong\u003e suitable for repeated assembly where a regulated compressed-air supply is available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoose your machine or die set\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMachine options and dies-only accessories are sold separately in this selector.\u003c\/strong\u003e The price and package depend on your selected option. Selecting one configuration does not include every die category shown.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\" style=\"text-align:left;padding:12px\"\u003eOption on this product page\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"text-align:left;padding:12px\"\u003eWhat to check\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\u003ca href=\"\/products\/iwiss-pneumatic-crimp-tool-for-16-240-mm2-cable-lugs?variant=42796123455649\"\u003eAM-240 Pneumatic Cable Lug Crimping Machine, 16–240 mm²\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\n\u003cstrong\u003eComplete machine option.\u003c\/strong\u003e Select the specified tooling configuration; other die categories are separate options.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\u003ca href=\"\/products\/iwiss-pneumatic-crimp-tool-for-16-240-mm2-cable-lugs?variant=43456895942817\"\u003eAM-240 Die Set — 5 Sets, Dies Only\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\n\u003cstrong\u003eDies \/ jaws only. Machine not included.\u003c\/strong\u003e Confirm model fit, profile and individual die sizes before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\u003ca href=\"\/products\/iwiss-pneumatic-crimp-tool-for-16-240-mm2-cable-lugs?variant=44786879234209\"\u003eB-Type Crimping Dies Only\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\n\u003cstrong\u003eDies \/ jaws only. Machine not included.\u003c\/strong\u003e Confirm model fit, profile and individual die sizes before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\u003ca href=\"\/products\/iwiss-pneumatic-crimp-tool-for-16-240-mm2-cable-lugs?variant=44786879299745\"\u003ePoint-Type Crimping Dies Only\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #ddd\"\u003e\n\u003cstrong\u003eDies \/ jaws only. Machine not included.\u003c\/strong\u003e Confirm model fit, profile and individual die sizes before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eUnderstand the die categories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex:\u003c\/strong\u003e forms a hexagonal crimp; use only with terminals specified for that profile and die size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB type:\u003c\/strong\u003e a distinct forming profile. Match the terminal design rather than choosing by conductor size alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint \/ indent:\u003c\/strong\u003e creates a localized indentation; it is not the same profile as hex or B type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eModel range is not the working range of every optional die.\u003c\/strong\u003e Do not assume B or point dies cover the full 16–240 mm² range, or that AM-70 and AM-240 accessories interchange. Check the machine model, die mounting, profile, terminal barrel and individual die markings together.\u003c\/p\u003e\n\u003csection id=\"custom-lug-tooling\" class=\"iwiss-am-custom\" style=\"margin:28px 0;padding:24px;border:1px solid #dbe3ed;border-top:4px solid #143c87;border-radius:8px;background:#f5f8fc;font-size:17px;line-height:1.65\"\u003e\n\u003cp style=\"margin:0 0 8px;color:#b52232;font-size:13px;font-weight:700;letter-spacing:1px\"\u003eIWISS ENGINEERING · CUSTOM CRIMPING DIES\u003c\/p\u003e\n\u003ch2 style=\"margin:0 0 14px;font-size:27px;line-height:1.3\"\u003eNeed custom dies for your AM-240?\u003c\/h2\u003e\n\u003cp\u003eFor larger power-cable assemblies or a special terminal geometry, the standard die schedule may not match your required connection. IWISS can assess application-specific die profiles and sizes for your actual wire and terminal combination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlready own the machine?\u003c\/strong\u003e Ask about custom dies for your existing AM-240 before buying another machine. Feasibility depends on the machine interface, available force and stroke, terminal geometry and agreed test criteria. Do not assume AM-70 and AM-240 dies interchange or that customization extends the machine's rated capacity.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px;margin:18px 0\"\u003e\n\u003cdiv style=\"flex:1 1 230px;background:#fff;border:1px solid #dbe3ed;border-radius:6px;padding:18px\"\u003e\n\u003ch3 style=\"margin:0 0 10px;font-size:20px\"\u003e1. Tell us what you need\u003c\/h3\u003e\n\u003cul style=\"margin:0;padding-left:20px\"\u003e\n\u003cli\u003eYour company and project contact\u003c\/li\u003e\n\u003cli\u003eThe connection problem or desired result\u003c\/li\u003e\n\u003cli\u003eMachine model\/photos, terminal part number and wire size\/material\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:12px 0 0\"\u003eAdd drawings, current die photos and completed sample photos if available. No CAD is required to start.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 230px;background:#fff;border:1px solid #dbe3ed;border-radius:6px;padding:18px\"\u003e\n\u003ch3 style=\"margin:0 0 10px;font-size:20px\"\u003e2. Define the right solution\u003c\/h3\u003e\n\u003cp style=\"margin:0\"\u003eOur sales and engineering team reviews die mounting, crimp geometry, connection combinations and validation needs. Pull-force tests, cross-section analysis or other agreed checks can be scoped for your project.\u003c\/p\u003e\n\u003cp style=\"margin:12px 0 0\"\u003e\u003cstrong\u003eInitial review is free.\u003c\/strong\u003e Detailed design, fabrication and physical testing require an approved paid scope.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"display:flex;gap:12px;flex-wrap:wrap\"\u003e\u003ca href=\"\/pages\/connection-testing-oem-odm-services#custom-request\" style=\"display:inline-block;padding:13px 18px;border-radius:4px;background:#143c87;color:white;text-decoration:none;font-weight:700\"\u003eCustom die service \u0026amp; request form\u003c\/a\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/IWISS-Custom-Tooling-Service-Guide-EN-v4.pdf?v=1793614630\" target=\"_blank\" rel=\"noopener\" style=\"display:inline-block;padding:12px 18px;border:1px solid #143c87;border-radius:4px;color:#143c87;background:white;text-decoration:none;font-weight:700\"\u003eDownload English request form (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStart on page 2 of the guide.\u003c\/strong\u003e Page 3 can be completed later with your engineering or purchasing colleagues. Save the form and email it with available photos or drawings to your assigned IWISS sales and technical contacts, or \u003ca href=\"mailto:sales@iwiss.com?subject=AM-240%20custom%20die%20enquiry\"\u003esales@iwiss.com\u003c\/a\u003e. The PDF does not submit automatically.\u003c\/p\u003e\n\u003cdetails style=\"background:#fff;border:1px solid #dbe3ed;padding:14px;border-radius:5px\"\u003e\u003csummary style=\"cursor:pointer;font-weight:700;color:#143c87\"\u003ePreview the English guide \u0026amp; two-page request form\u003c\/summary\u003e\u003ciframe title=\"AM-240 custom die service guide and request form\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/IWISS-Custom-Tooling-Service-Guide-EN-v4.pdf?v=1793614630#page=2\u0026amp;view=FitH\" loading=\"lazy\" width=\"100%\" height=\"600\" style=\"width:100%;max-width:100%;height:600px;border:0;margin-top:15px\"\u003e\u003c\/iframe\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/IWISS-Custom-Tooling-Service-Guide-EN-v4.pdf?v=1793614630\" target=\"_blank\" rel=\"noopener\"\u003eIf the preview is unavailable, open the PDF here.\u003c\/a\u003e\u003c\/p\u003e\u003c\/details\u003e\n\u003cp style=\"font-size:15px;margin:16px 0 0\"\u003e\u003cstrong\u003eBefore sending samples:\u003c\/strong\u003e wait for the project-specific sample instructions. If available, include a completed assembly for reference. Development fees and custom-product supply are separate; MOQ and unit prices are confirmed after engineering review. At most one in-scope design revision is included; additional changes are quoted by workload. See the \u003ca href=\"\/pages\/connection-testing-oem-odm-services#custom-pricing\"\u003eservice guide and project terms\u003c\/a\u003e for pricing and validation options. Testing does not automatically establish certification.\u003c\/p\u003e\u003c\/section\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eAM-240\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eListed conductor range\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e16–240 mm²\u003c\/strong\u003e, subject to selected tooling and terminal compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eAir pressure\u003c\/th\u003e\n\u003ctd\u003e\u003cstrong\u003eApproximately 102–138 psi \/ 7–9.5 bar \/ 0.7–0.95 MPa\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eOperation\u003c\/th\u003e\n\u003ctd\u003ePneumatic cylinder with foot-pedal control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eSupplier force designation\u003c\/th\u003e\n\u003ctd\u003e10 T. Confirm the kN\/lbf rating if your process requires a specified force.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e22 kg \/ approximately 48.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:10px\"\u003eListed machine accessories\u003c\/th\u003e\n\u003ctd\u003eCrimping dies for the selected configuration, PU tube and foot control; confirm the individual die schedule. Dies-only options exclude the machine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFor North American buyers:\u003c\/strong\u003e mm² describes conductor cross-sectional area, not diameter. Match AWG\/kcmil cable to a confirmed die schedule; numerical conversions alone do not establish compatibility. 6 AWG is approximately 13.3 mm² and 500 kcmil is approximately 253.4 mm², both outside the listed metric endpoints.\u003c\/p\u003e\n\u003ch2\u003eWhat air supply do I need?\u003c\/h2\u003e\n\u003cp\u003eUse \u003cstrong\u003eclean, dry compressed air with a pressure regulator and water-separating filter\u003c\/strong\u003e. Check pressure at the machine during operation, allowing for losses through hoses and fittings. A compressor's maximum tank pressure alone does not confirm suitability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompressor flow capacity matters as well as pressure.\u003c\/strong\u003e Request the machine's air consumption and required duty cycle before choosing compressor horsepower, tank size or SCFM capacity. Follow the AM-series manual for hose connections, maintenance and lubrication.\u003c\/p\u003e\n\u003ch2\u003eApplications and workflow\u003c\/h2\u003e\n\u003cp\u003eConsider AM-240 for compatible larger power cable assemblies used in electrical cabinets, industrial equipment, energy-storage connections and workshop cable fabrication. Suitability depends on the conductor, lug design, die profile and the connection's specified acceptance criteria.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eConfirm terminal material, barrel dimensions, conductor size and the required crimp profile.\u003c\/li\u003e\n\u003cli\u003eIsolate the air supply before installing or changing dies; secure the tooling as instructed.\u003c\/li\u003e\n\u003cli\u003eStrip the cable to the specified length without damaging strands, then fully insert it into the lug.\u003c\/li\u003e\n\u003cli\u003ePosition the assembly with fingers clear of the crimping area and operate the foot pedal according to the manual.\u003c\/li\u003e\n\u003cli\u003eInspect a first sample and perform the checks required by the terminal supplier before continuing production.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAM-240 or AM-70?\u003c\/h2\u003e\n\u003cp\u003eChoose AM-240 for its listed 16–240 mm² range. For smaller battery cable assemblies and B, point, hex or AWG-labelled machine choices, compare \u003ca href=\"\/products\/icrimp-pneumatic-crimp-tool-for-6-70mm-battery-cable-lugs\"\u003e\u003cstrong\u003eAM-70 — 6–70 mm²\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese are separate machines with separate purchase options.\u003c\/strong\u003e A link to the other model does not imply shared dies, identical packages or universal terminal compatibility.\u003c\/p\u003e\n\u003csection\u003e\u003ch2\u003eOptional wire preparation tools\u003c\/h2\u003e\n\u003cp\u003eAdd these only if your workstation needs cutting or stripping equipment.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"\/products\/haicable-mechanical-cable-cutter-vc-30a-wire-cutter-ratchet-cable-cutter-for-cutting-copper-and-aluminum-cable-below-500mcm-dia-32mm-240mm2\"\u003e\u003cstrong\u003eVC-30A ratchet cable cutter\u003c\/strong\u003e\u003c\/a\u003e\u003cp\u003eFor compatible copper\/aluminum cable within the cutter's stated diameter and cross-section limits. Confirm suitability near 240 mm²; it is not for steel or ACSR.\u003c\/p\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\n\u003ch2\u003eQuestions before ordering\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the lowest price include a machine?\u003c\/strong\u003e\u003cbr\u003eNo. Options marked “Dies Only” or “Jaws Only” are accessories. Select a complete machine option for a new workstation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use any lug of the same wire size?\u003c\/strong\u003e\u003cbr\u003eConductor size alone is insufficient. Confirm terminal material, barrel dimensions, crimp profile and tooling with the terminal supplier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I swap dies between AM-70 and AM-240?\u003c\/strong\u003e\u003cbr\u003eDo not assume interchangeability. Send the exact machine model and die part details for a compatibility check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed help selecting?\u003c\/strong\u003e Send your machine model, selected option, terminal drawing or clear photos, conductor size\/material, required crimp profile and available air pressure to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\u003caside class=\"ic-trade-order-note\" style=\"margin:24px 0;padding:18px;border:1px solid #dbe3ed;border-left:4px solid #143c87;border-radius:6px;background:#f6f8fb\"\u003e\u003ch3 style=\"margin:0 0 8px\"\u003eBuying for a crew or workshop?\u003c\/h3\u003e\n\u003cp style=\"margin:0\"\u003eQuantity savings vary by the selected model or accessory. See the applicable quantity offer and confirm savings at checkout. Different products do not combine toward the quantity tiers; a complete kit counts as one unit. \u003ca href=\"\/pages\/wholesale\"\u003eView bulk pricing and request a mixed-order quote\u003c\/a\u003e for your team, workshop or repeat supply needs. Confirm your discount at checkout.\u003c\/p\u003e\u003c\/aside\u003e\u003ch3\u003eMatch the cable, terminal and crimper\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSelect by conductor size, terminal construction and specified crimp profile together.\u003c\/strong\u003e AWG and mm² labels are not interchangeable die markings. Check the terminal part number, barrel dimensions and conductor stranding before ordering. \u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead our US \u0026amp; European cable, lug and crimper selection guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eChoose AM-240 for larger compatible cable terminations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eThe 16–240 mm² model range addresses larger cable-lug jobs than AM-70’s 6–70 mm² range.\u003c\/strong\u003e Consider it for repeated industrial equipment, cabinet, UPS and energy-storage cable preparation where the selected terminal and tooling are approved for the connection.\u003c\/p\u003e\u003ch2\u003eBefore equipping the station\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the exact die schedule:\u003c\/strong\u003e a machine’s maximum range is not the range of every B or point accessory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the package:\u003c\/strong\u003e low-priced dies-only selections exclude the machine and foot-operated workstation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport heavy cables:\u003c\/strong\u003e plan stable mounting, cable routing and finger clearance around the dies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify pressure and flow:\u003c\/strong\u003e match the air installation to the actual operating rate and current machine instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor smaller terminations or a different die category, compare the separately listed AM-70. Do not assume the two machines share interchangeable tooling.\u003c\/p\u003e\u003ch2\u003eMatch your cable, terminal and tooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck conductor material, AWG or mm² marking, strand construction and lug part number together.\u003c\/strong\u003e A stud-hole diameter identifies the mounting bolt, not the cable size. Fine-stranded battery or welding cable needs a terminal approved for that conductor construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAWG and metric labels are sizing systems, not US or European certification.\u003c\/strong\u003e Follow the terminal manufacturer's specified die, crimp profile, crimp locations and acceptance criteria. A hex-shaped result alone does not establish DIN or UL compliance.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead the battery cable, lug and crimper selection guide\u003c\/a\u003e · \u003ca href=\"\/pages\/us-metric-tool-size-guide#wire-size\"\u003eAWG and metric sizing reference\u003c\/a\u003e · \u003ca href=\"\/collections\/battery-lug-crimping-tool\"\u003eCompare all lug crimping tools\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed a fit check?\u003c\/strong\u003e Send the cable marking, terminal part number, side\/end photos and expected daily workload to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"iCrimp Tools","offers":[{"title":"AM-240 Pneumatic Cable Lug Crimping Machine, 16–240 mm²","offer_id":42796123455649,"sku":"AM-240-1 Pneumatic crimper","price":799.99,"currency_code":"USD","in_stock":true},{"title":"AM-240 Die Set — 5 Sets, Dies Only","offer_id":43456895942817,"sku":"AM-70 jaws","price":59.99,"currency_code":"USD","in_stock":true},{"title":"B-Type Crimping Dies Only","offer_id":44786879234209,"sku":"B TYPE DIES","price":69.99,"currency_code":"USD","in_stock":true},{"title":"Point-Type Crimping Dies Only","offer_id":44786879299745,"sku":"Point TYPE DIES","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/4_a7e607a4-9926-4c71-9e6f-65b5e80b90b4-552692.webp?v=1732520875"},{"product_id":"iwiss-iws-3220m-micro-connector-pin-crimping-tool-0-03-0-52mm-32-20awg-ratcheting-crimper-for-d-sub-open-barrel-suits-molex-jst-jae","title":"IWS-3220M Micro Connector Pin Crimping Tool for AWG32-20 D-Sub, Open Barrel Terminal suits Molex, JST, JAE","description":"\u003ch3 class=\"a-size-base-plus a-text-bold\" data-mce-fragment=\"1\"\u003eAbout this item\u003c\/h3\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eIdeal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eTypical parallel crimping type ensures stability and power equality and improves 30% of the crimping-tightness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eDouble-layer Wire Electrical discharge machining(EDM). Cutting jaw crimps conductor and insulation sheath simultaneously\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eEasy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan class=\"a-list-item\" data-mce-fragment=\"1\"\u003eSuits Molex CLIK-Mate, Molex PicoBlade, JST SHD, JAM, TYCO D-100,etc\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003csection id=\"ic-wire-preparation\"\u003e\u003ch2\u003eMatched cutting \u0026amp; stripping tools\u003c\/h2\u003e\n\u003cp\u003eFor electronics harness preparation. FSA-0626B covers only 30–20 AWG of the crimper's 32–20 AWG range; 32 AWG needs a separately verified fine-wire stripper.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px\"\u003e\n\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/iwiss-fsa-0626b-wire-stripper-for-0-2-0-8mm-awg-30-20-with-automatic-rebound-spring?variant=42775107666081\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/S9e28b868f7e84b1ab178cbb715644403T-959984.jpg?v=1732520730\" alt=\"FSA-0626B fine-wire stripper\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eFSA-0626B fine-wire stripper\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eChoose the B version for the listed 30–20 AWG fine-wire range. It does not cover 32 AWG or the larger 18–14 AWG end of some crimpers.\u003c\/p\u003e\u003c\/article\u003e\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/icrimp-diagonal-flush-cutter-side-cutting-pliers-electronics-pliers-with-pointed-nose-for-reeled-terminals-soft-wires-electronics-jewelry-making-zip-tes-plastic?variant=42325677244577\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/PL2100.webp?v=1744170589\" alt=\"PL2100 — 5-inch flush cutter\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003ePL2100 — 5-inch flush cutter\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eFor trimming plastic cable ties and fine soft-wire ends in electronics work. Not for steel or heavy battery cable; check the material and cutting limit before use.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eOptional purchases:\u003c\/strong\u003e check your selected kit contents and skip tools already included or owned. Work on disconnected conductors, test stripping on a sample and use the terminal manufacturer's specified strip length. These accessories are not automatically included with the crimper.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"‎IWS-3220M","offer_id":43128402804897,"sku":"‎IWS-3220M","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/3220m.jpg?v=1711531346"},{"product_id":"iwiss-ratcheting-crimping-tool-set-8-pcs-quick-exchange-jaw-for-heat-shrink-non-insulated-open-barrel-insulated-and-non-insulated-ferrules-awg-20-2","title":"8PCS Ratcheting Crimping Tool Kit for AWG20-2 Heat Shrink, Open Barrel, Insulated and Non-Insulated Ferrules","description":"\u003csection class=\"ic-tool-detail\" id=\"ic60-selection\"\u003e\n\u003cheader\u003e\u003cp class=\"ic-tool-eyebrow\"\u003eKIT-0535 · Manual electrical terminal crimping\u003c\/p\u003e\n\u003ch2\u003eOne portable kit. Six terminal-specific dies.\u003c\/h2\u003e\n\u003cp\u003eKeep a ratcheting crimper, wire preparation tool and six quick-change die sets together for maintenance, repair and varied workbench tasks. Choose the terminal first, then the matching die and wire range.\u003c\/p\u003e\u003c\/header\u003e\n\u003cnav class=\"ic-tool-jumps\" aria-label=\"Product detail navigation\"\u003e\u003ca href=\"#kit0535-included\"\u003eWhat's included\u003c\/a\u003e\u003ca href=\"#kit0535-dies\"\u003eChoose a die\u003c\/a\u003e\u003ca href=\"#kit0535-operation\"\u003eHow to use\u003c\/a\u003e\u003ca href=\"#kit0535-faq\"\u003eQuestions\u003c\/a\u003e\u003c\/nav\u003e\n\u003cfigure\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-1.jpg\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open full-size image: KIT-0535 case with crimper, stripper\/cutter and six die sets\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-1.jpg\" width=\"1464\" height=\"600\" loading=\"lazy\" alt=\"KIT-0535 case with crimper, stripper\/cutter and six die sets\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003csection id=\"kit0535-included\"\u003e\u003ch2\u003eWhat comes in the KIT-0535?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 ratcheting crimping tool\u003c\/strong\u003e with quick-change die mounting.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 wire cutter and stripper.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 interchangeable die sets:\u003c\/strong\u003e 35WF, 10WF, 10N, 04B, 125 and 03C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage case\u003c\/strong\u003e to keep the set organised.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe eight-piece count refers to the crimper, cutter\/stripper and six die sets. This is the complete KIT-0535 tool set, not a replacement die. Wires and terminals shown in application images illustrate use and are not listed as supplied contents.\u003c\/p\u003e\u003c\/section\u003e\n\u003csection id=\"kit0535-dies\"\u003e\u003ch2\u003eMatch your terminal to the correct die\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe headline wire range is combined coverage, not the range of every die.\u003c\/strong\u003e The 2 AWG endpoint applies to the 35WF ferrule die; it does not mean this kit crimps 2 AWG battery lugs.\u003c\/p\u003e\n\u003cdiv class=\"ic-die-grid\"\u003e\n\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e35WF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInsulated and non-insulated wire-end ferrules\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e6–35 mm² · 8–2 AWG\u003c\/p\u003e\n\u003cp\u003eFerrules, not heavy-wall battery cable lugs.\u003c\/p\u003e\u003c\/article\u003e\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e10WF\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInsulated and non-insulated wire-end ferrules\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5–10 mm² · 20–8 AWG\u003c\/p\u003e\n\u003cp\u003eMatch the ferrule barrel and selected cavity.\u003c\/p\u003e\u003c\/article\u003e\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e10N\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNon-insulated U- and O-type terminals\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5–10 mm² · 20–8 AWG\u003c\/p\u003e\n\u003cp\u003eVerify barrel construction; not a universal lug die.\u003c\/p\u003e\u003c\/article\u003e\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e04B\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOpen-barrel terminals\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5–6 mm² · 20–10 AWG\u003c\/p\u003e\n\u003cp\u003eTerminal geometry must match; not every micro or sealed contact is supported.\u003c\/p\u003e\u003c\/article\u003e\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e125\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHeat-shrink connectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5–6 mm² · 22–10 AWG\u003c\/p\u003e\n\u003cp\u003eUse the correct cavity and inspect the insulation after crimping.\u003c\/p\u003e\u003c\/article\u003e\u003carticle class=\"ic-die-card\"\u003e\u003ch3\u003e03C\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInsulated terminals\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e0.5–6 mm² · 20–10 AWG\u003c\/p\u003e\n\u003cp\u003eMatch the terminal size, not insulation colour alone.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp\u003eRanges above reproduce the model's published die chart. AWG and mm² are the listed ranges, not exact conversions for every cavity. Check the die marking, wire size and terminal specification together.\u003c\/p\u003e\n\u003cfigure\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-2.jpg\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open full-size image: KIT-0535 six-die compatibility chart showing terminal types and individual AWG and square millimetre ranges\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-2.jpg\" width=\"1464\" height=\"600\" loading=\"lazy\" alt=\"KIT-0535 six-die compatibility chart showing terminal types and individual AWG and square millimetre ranges\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\u003c\/section\u003e\n\u003csection id=\"kit0535-operation\"\u003e\u003ch2\u003eQuick die changes, without a separate changing tool\u003c\/h2\u003e\n\u003cp\u003eWith the tool unloaded and jaws open, press the retaining pin to release the die, fit the matching die halves and check that they are secured before use. Keep the halves of each die set together.\u003c\/p\u003e\n\u003cfigure\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-4.jpg\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open full-size image: Press the retaining pin and exchange the matching crimp die halves\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-4.jpg\" width=\"1464\" height=\"600\" loading=\"lazy\" alt=\"Press the retaining pin and exchange the matching crimp die halves\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\u003ch2\u003ePrepare, crimp and inspect\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify:\u003c\/strong\u003e check terminal construction and the conductor size, then select the matching die and cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare:\u003c\/strong\u003e strip to the terminal manufacturer's required length without nicking strands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e insert the wire fully and align the terminal in the correct cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrimp:\u003c\/strong\u003e complete the ratchet cycle. Do not force an oversized or incompatible terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect:\u003c\/strong\u003e make a sample connection before repeat work. Check conductor engagement, terminal shape and insulation condition against the terminal specification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eA complete ratchet cycle cannot compensate for the wrong die. Appearance or electrical continuity alone is not proof of a qualified connection; apply the relevant crimp-height and pull-test requirements where specified.\u003c\/p\u003e\n\u003cfigure\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-3.jpg\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open full-size image: Selecting the die, stripping the conductor and crimping a wire-end ferrule\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-3.jpg\" width=\"1464\" height=\"600\" loading=\"lazy\" alt=\"Selecting the die, stripping the conductor and crimping a wire-end ferrule\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\u003c\/section\u003e\n\u003csection\u003e\u003ch2\u003eWhere this kit fits your workflow\u003c\/h2\u003e\n\u003cp\u003eA practical choice when you need several supported terminal styles in one case. For repeated work on one terminal, a dedicated crimper may reduce tool changes. For a connector requiring a specified locator, seal crimp or manufacturer-approved tool, check that requirement before selecting this kit.\u003c\/p\u003e\n\u003cfigure\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-5.jpg\" target=\"_blank\" rel=\"noopener\" aria-label=\"Open full-size image: Examples of electrical maintenance and equipment wiring applications\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/icrimp-kit-0535-aplus-5.jpg\" width=\"1464\" height=\"600\" loading=\"lazy\" alt=\"Examples of electrical maintenance and equipment wiring applications\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\u003cp\u003eApplication scenes do not imply approval for every connector used in those industries. This set is not a PEX tool, a universal solar-connector tool or a universal automotive-contact crimper. Work on de-energised conductors; the grips are not an electrical-insulation rating.\u003c\/p\u003e\u003c\/section\u003e\n\u003csection id=\"kit0535-faq\"\u003e\u003ch2\u003eBefore you order\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes every die support AWG 20–2?\u003c\/summary\u003e\u003cp\u003eNo. Each die has its own terminal type and range. Use the six-die guide above rather than the combined headline range.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDoes it work with my open-barrel connector?\u003c\/summary\u003e\u003cp\u003eWire size alone cannot confirm compatibility. Send the terminal part number, clear photos and conductor size so we can check the geometry. Micro contacts and sealed contacts may need a dedicated tool.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eCan I fit another brand's dies?\u003c\/summary\u003e\u003cp\u003eDo not assume interchangeability from appearance. Confirm the mounting, crimp profile and frame compatibility before using another die.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eDo I need another stripper or cutter?\u003c\/summary\u003e\u003cp\u003eA cutter\/stripper is already included. Add a separate preparation tool only when its verified capacity or function meets a different requirement.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003eWhat information helps you check my application?\u003c\/summary\u003e\u003cp\u003eSend the terminal part number or photos, wire AWG or mm², insulation diameter where relevant, and the die you intend to use.\u003c\/p\u003e\u003c\/details\u003e\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003eAsk for a terminal and die compatibility check\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"KIT-0535","offer_id":43123082854561,"sku":"KIT-0535","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/products\/1_4b0e101e-f654-45a0-90b0-8b186ff99cfd.webp?v=1678696010"},{"product_id":"iwiss-battery-cable-lug-crimping-tool-kit-for-8-6-4-2-1-1-0-2-0-3-0-4-0-awg-copper-ring-terminals-battery-cable-ends-copper-splice-c-w-radial-wire-stripper","title":"IWS-0840S Manual Hex Battery Lug Crimper Kit, 8–4\/0 AWG","description":"\u003csection id=\"ic-sales-decision-v1\"\u003e\u003ch2\u003ePrepare larger battery cables with a manual lug-crimp kit\u003c\/h2\u003e\n\u003cp\u003eFor workshop and vehicle power-cable jobs requiring the listed AWG 8 through 4\/0 die positions.\u003c\/p\u003e\n\u003ch3\u003eChoose the right configuration\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e4 AWG and 4\/0 AWG are different sizes. Match lug barrel, material and conductor construction to the die; the stripper rating is not the crimper rating.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eAdd the correct cable-end consumables\u003c\/h3\u003e\n\u003cp\u003eThe listed package does not include lugs or heat shrink. Choose lug wire size, stud hole and barrel dimensions first; a small mixed assortment may not cover 2\/0–4\/0 work.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003eGet a model and application check before ordering\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"ic-independent-guide\"\u003e\u003ch2\u003eWhy does 4\/0 need a separate check?\u003c\/h2\u003e\n\u003cp\u003e4\/0 AWG is substantially larger than 4 AWG. Check the die marking, lug barrel and actual conductor construction before buying; a matching stud hole tells you nothing about the wire size.\u003c\/p\u003e\u003c\/section\u003e\u003ch2\u003eIWS-0840S battery cable lug crimping kit\u003c\/h2\u003e\u003cp\u003eA manual stripping and hex-crimping kit with a lug crimper, three interchangeable die sets, radial stripper and carrying case. Cable, lugs and heat-shrink tubing are not included in the listed kit.\u003c\/p\u003e\u003ch3\u003eWorking range\u003c\/h3\u003e\u003cp\u003eListed crimping sizes: 8, 6, 4, 2, 1, 1\/0, 2\/0, 3\/0 and 4\/0 AWG. 4 AWG is different from 4\/0 AWG. The stripper has its own capacity; do not use that capacity as the crimper's range.\u003c\/p\u003e\u003ch3\u003eConfirm the connection\u003c\/h3\u003e\u003cp\u003eMatch conductor construction, lug material and barrel geometry, die position and required crimp method. For aluminum or specialized connectors, confirm tooling and preparation requirements with the connector manufacturer. Follow specified inspection and testing before energizing; die markings alone do not certify the connection.\u003c\/p\u003e\u003csection id=\"ic-project-companions\"\u003e\u003ch2\u003eOptional project companions\u003c\/h2\u003e\n\u003cp\u003eOptional starter refill for the overlapping AWG 8, 6, 4, 2 and 1\/0 sizes only. This assortment does not cover AWG 1 or 2\/0–4\/0. Match stud holes and barrel geometry.\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/50pcs-heavy-duty-wire-lugs-awg8-6-4-2-1-0-battery-cable-closed-ends-with-40pcs-heat-shrink-tubes\"\u003e50PCS Heavy Duty Wire Lugs, AWG8, 6, 4, 2, 1\/0, Battery Cable Closed Ends with 40PCS Heat Shrink Tubes\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c\/section\u003e\u003ch3\u003eMatch the cable, terminal and crimper\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSelect by conductor size, terminal construction and specified crimp profile together.\u003c\/strong\u003e AWG and mm² labels are not interchangeable die markings. Check the terminal part number, barrel dimensions and conductor stranding before ordering. \u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead our US \u0026amp; European cable, lug and crimper selection guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eOne kit for a wider AWG die schedule\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChoose IWS-0840S when your jobs span the listed 8–4\/0 AWG positions and you prefer interchangeable dies.\u003c\/strong\u003e For dedicated built-in cavities, compare the \u003ca href=\"\/products\/iwiss-heavy-duty-copper-lug-crimping-tool-for-awg-8-6-4-2-1-gauge-battery-cable-ring-terminal-ends-with-built-in-cable-cutter\"\u003e0801C \/ 0810N \/ 1040S family\u003c\/a\u003e; for a fixed workstation, compare the \u003ca href=\"\/products\/iwiss-iws-1040dt-1-0awg-to-4-0awg-bench-battery-cable-lug-tubular-ring-crimper-for-automotive-truck-aftermarket\"\u003eDTS bench hex family\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eChanging dies and checking a sample\u003c\/h2\u003e\u003cp\u003eInstall the matching die pair securely, confirm its AWG marking and fully insert the stripped conductor. Follow the terminal’s crimp positions and inspection criteria. Recheck alignment and the first completed crimp after each die change. \u003cstrong\u003eThe carrying case, stripper and crimper serve different functions; their capacities are not interchangeable.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eMatch your cable, terminal and tooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck conductor material, AWG or mm² marking, strand construction and lug part number together.\u003c\/strong\u003e A stud-hole diameter identifies the mounting bolt, not the cable size. Fine-stranded battery or welding cable needs a terminal approved for that conductor construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAWG and metric labels are sizing systems, not US or European certification.\u003c\/strong\u003e Follow the terminal manufacturer's specified die, crimp profile, crimp locations and acceptance criteria. A hex-shaped result alone does not establish DIN or UL compliance.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead the battery cable, lug and crimper selection guide\u003c\/a\u003e · \u003ca href=\"\/pages\/us-metric-tool-size-guide#wire-size\"\u003eAWG and metric sizing reference\u003c\/a\u003e · \u003ca href=\"\/collections\/battery-lug-crimping-tool\"\u003eCompare all lug crimping tools\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed a fit check?\u003c\/strong\u003e Send the cable marking, terminal part number, side\/end photos and expected daily workload to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\u003csection id=\"custom-lug-tooling\"\u003e\u003ch2\u003eCustom Crimping Solutions for Volume Orders\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNeed tooling tailored to your cable lugs and target market?\u003c\/strong\u003e For qualifying order quantities, iCrimp offers professional customization services to better match regional cable-lug specifications and your application’s crimping requirements.\u003c\/p\u003e\n\u003cp\u003eOur team can assess \u003cstrong\u003ecustom die geometry, size markings and tooling configurations\u003c\/strong\u003e against your terminal drawings or samples, conductor construction and required crimp profile. The aim is a better-matched crimping process for consistent, reliable connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest an engineering review:\u003c\/strong\u003e send your expected quantity, destination country, applicable standard or customer specification, terminal part number\/drawing, cable material and AWG or mm² size. Include samples or clear photos and any required crimp dimensions or test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum order quantity, feasibility, development cost and lead time are confirmed per project.\u003c\/strong\u003e Final suitability and any compliance claims depend on the agreed sample evaluation and validation; customization alone does not establish certification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"mailto:sales@iwiss.com?subject=Custom%20Cable%20Lug%20Crimping%20Tool%20Inquiry\"\u003eDiscuss your custom crimping project\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"ic-wire-preparation\"\u003e\u003ch2\u003eMatched cutting \u0026amp; stripping tools\u003c\/h2\u003e\n\u003cp\u003eA radial stripper is already included. Add ICP-206 only for cutting 8, 6 or 4 AWG soft copper jobs. It is not a cutter for 2 AWG through 4\/0 AWG; choose a larger rated cutter for those cables.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px\"\u003e\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/icrimp-wire-cutter-shear-cut-electricians-cable-cutting-pliers-up-to-3-gauge-wires-compact-style?variant=43128467128481\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/Wire_Cutter_ICP-206-793966.jpg?v=1732520913\" alt=\"ICP-206 cable cutter\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eICP-206 cable cutter\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eFor soft copper up to 3 AWG or aluminum up to 4 AWG. Not for steel, ACSR or hard-drawn copper. Cutting capacity does not establish crimping compatibility.\u003c\/p\u003e\u003c\/article\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eOptional purchases:\u003c\/strong\u003e check your selected kit contents and skip tools already included or owned. Work on disconnected conductors, test stripping on a sample and use the terminal manufacturer's specified strip length. These accessories are not automatically included with the crimper.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"IWS-0840S","offer_id":43127272243361,"sku":"IWS-0840S","price":78.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/1_95a7f2e7-af38-471f-b020-4d4c41af6c84.jpg?v=1779693808"},{"product_id":"iwiss-iws-1608b-wire-rope-crimping-tool-for-aluminum-loop-sleeves-duplex-oval-cable-ferrules-1-16-to-3-16-c-w-wire-rope-cable-cutter","title":"IWS-1608B 24-Inch Wire Rope Swager \u0026 Cutter Kit, 1\/16–3\/16 in.","description":"\u003csection class=\"icrimp-rope-guide\"\u003e\u003ch2\u003eLong-handle leverage for larger cable sleeve assemblies\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIWS-1608B 24-inch hand swager\u003c\/strong\u003e is designed for compatible aluminum or copper wire rope sleeves in the \u003cstrong\u003e1\/16–3\/16 in. range\u003c\/strong\u003e. Long handles provide leverage for manual compression, while the portable format supports installation and repair work without an air supply. It is a practical step up from the smaller 1608M when your matched sleeve assembly requires greater capacity.\u003c\/p\u003e\n\u003ch3\u003eTool only or complete cutting-and-swaging kit\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIWS-1608B Tool Only\u003c\/th\u003e\n\u003ctd\u003eChoose this if you already have a suitable wire rope cutter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIWS-1608B + CWR60 Cutter Kit\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRecommended if you need both cutting and swaging.\u003c\/strong\u003e Includes the 24-inch swager and separate CWR60 cable cutter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSwaging range\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e1\/16–3\/16 in.\u003c\/strong\u003e nominal rope sizes (approximately 1.59–4.76 mm), using compatible sleeves and marked grooves.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible fittings\u003c\/th\u003e\n\u003ctd\u003eMatched aluminum or copper oval\/duplex sleeves. Confirm sleeve dimensions and compression instructions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCWR60 cutting capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 6 mm wire rope (approximately 0.236 in.). \u003cstrong\u003eThis is the cutter's rating; the swager remains limited to its 3\/16-in. range.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperation\u003c\/th\u003e\n\u003ctd\u003e24-in. manual hand tool; allow space for the full handle movement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConsumables\u003c\/th\u003e\n\u003ctd\u003eCable, sleeves and thimbles are not listed as included in these two configurations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eApplications and practical advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable loops for fences, trellises and general supports:\u003c\/strong\u003e select the rope and termination for the intended load and environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop cable fabrication:\u003c\/strong\u003e prepare loop-and-thimble assemblies with a dedicated groove instead of flattening sleeves with general-purpose pliers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-site maintenance:\u003c\/strong\u003e manual operation avoids a compressor, air hose or electrical connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger sleeve work within the range:\u003c\/strong\u003e 24-inch handles provide useful leverage, especially when moving beyond the smaller M family's capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor stainless steel threaded railing terminals, use a compatible \u003cstrong\u003eswage-stud crimper\u003c\/strong\u003e such as \u003ca href=\"\/products\/iws-2316lr-22-inch-stainless-steel-swage-stud-crimper-for-1-8-to-3-16-stainless-steel-wire-rope-tensioners\"\u003eIWS-2316LR 22-inch swage-stud crimper\u003c\/a\u003e. An aluminum-sleeve swager is not interchangeable with a stainless fitting tool.\u003c\/p\u003e\n\u003ch3\u003eCompare working methods\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"\/products\/iwiss-wire-rope-crimping-tool-for-aluminum-crimping-loop-sleeve-two-barrel-ferrule-oval-sleeves-3-64-in-to-1-8-in-wire-rope-swaging-tool-kit-with-wire-rope-cutter-1\"\u003eIWS-1608M \/ M-C hand swagers\u003c\/a\u003e suits smaller 3\/64–1\/8-in. assemblies and easier transport. \u003ca href=\"\/products\/iwiss-bench-swaging-tool-for-crimping-aluminum-wire-rope-end-sleeve-duplex-oval-sleeves-3-64-in-to-1-8-in-bench-mounted-crimper\"\u003eIWS-1608DT \/ DTS bench swager\u003c\/a\u003e supports repeated small-sleeve work at a secured bench. A pneumatic workstation suits higher repetition when the sleeve, die and air supply are matched.\u003c\/p\u003e\n\u003ch3\u003eMatch the cable, sleeve and die before you crimp\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify the fitting:\u003c\/strong\u003e an oval\/duplex sleeve makes a return loop; a stop sleeve has a different function. Match material, wall thickness and dimensions to the tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the actual rope diameter and construction.\u003c\/strong\u003e For coated rope, distinguish the bare metal diameter from the coated outside diameter and follow the fitting supplier's preparation instructions.\u003c\/li\u003e\n\u003cli\u003eSelect the marked groove approved for that cable\/sleeve combination. Follow the prescribed compression count, spacing and sequence; there is no universal crimp count for every sleeve.\u003c\/li\u003e\n\u003cli\u003eInspect for cracks, damaged strands and slipping. Use the fitting maker's specified gauge and acceptance dimensions where required. A hand pull alone does not establish a working load limit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eThe tool's size range is not an assembly load rating.\u003c\/strong\u003e Lifting, fall protection, structural and other safety-critical assemblies require an approved termination system and the specified verification process.\u003c\/p\u003e\n\u003ch3\u003eBuyer questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 6 mm cutter mean the kit crimps 6 mm cable?\u003c\/strong\u003e No. Cutting and swaging are different ratings. The IWS-1608B swaging range ends at 3\/16 in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill every sleeve sold for 3\/16-inch cable fit?\u003c\/strong\u003e No. Sleeve material, wall thickness and profile also matter. Send the sleeve drawing and rope specification if compatibility is uncertain.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/how-to-use-a-wire-rope-crimping-tool\"\u003eRead our wire rope sleeve selection, swaging and inspection guide\u003c\/a\u003e or \u003ca href=\"\/collections\/wire-rope-crimp-tool\"\u003ecompare tools by application and working method\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"IWS-1608B + CWR60 Cutter Kit","offer_id":43128451727521,"sku":"IWS-1608B-CWR60","price":80.99,"currency_code":"USD","in_stock":true},{"title":"IWS-1608B Tool Only","offer_id":48479677776033,"sku":"‎IWS-1608B","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/51YtsiUncfL._AC_SL1001_3bf0758e-2a6e-4863-8f48-21d4853e61a4-163989.jpg?v=1732520790"},{"product_id":"iwiss-wire-rope-crimping-tool-for-aluminum-crimping-loop-sleeve-two-barrel-ferrule-oval-sleeves-3-64-in-to-1-8-in-wire-rope-swaging-tool-kit-with-wire-rope-cutter-1","title":"IWS-1608M Wire Rope Swaging Tool \u0026 Cutter Kit, 3\/64–1\/8 in.","description":"\u003csection class=\"icrimp-rope-guide\"\u003e\u003ch2\u003ePortable sleeve swaging for small wire rope loops\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eIWS-1608M hand swager\u003c\/strong\u003e compresses compatible aluminum or copper sleeves to form wire rope eyes and loops. Its \u003cstrong\u003e15-inch manual format\u003c\/strong\u003e suits on-site repairs, workshop projects and small cable assemblies without a power supply. Choose a tool-only configuration if you already own a cable cutter, or the kit for a separate cutting-and-crimping workflow.\u003c\/p\u003e\n\u003ch3\u003eChoose your configuration\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIWS-1608M Tool Only\u003c\/th\u003e\n\u003ctd\u003eManual sleeve swager; separate cable cutter required.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIWS-1608M + CWR35 Cutter Kit\u003c\/th\u003e\n\u003ctd\u003eIWS-1608M plus CWR35 wire rope cutter. \u003cstrong\u003ePractical starting choice for cutting cable and making loops.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIWS-1608M-C with Built-in Cutter\u003c\/th\u003e\n\u003ctd\u003eAlternative hand swager with an integrated cutting function. This is the M-C model, not the separate CWR35 kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSwaging range\u003c\/th\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3\/64–1\/8 in.\u003c\/strong\u003e nominal wire rope sizes (approximately 1.19–3.18 mm), with matched sleeves and the appropriate marked groove.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFitting type\u003c\/th\u003e\n\u003ctd\u003eCompatible aluminum\/copper oval, duplex or hourglass sleeves; matched stop fittings where specified for the model. Not stainless steel railing swage studs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower \/ working method\u003c\/th\u003e\n\u003ctd\u003eManual, portable hand swaging; no electricity or compressed air.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKit cutter capacity\u003c\/th\u003e\n\u003ctd\u003eCWR35: up to 3.5 mm wire rope (approximately 0.138 in.). \u003cstrong\u003eCutter capacity does not increase the swager's 1\/8-in. limit.\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePackage selection\u003c\/th\u003e\n\u003ctd\u003eTool and cutter contents depend on the selected configuration. Rope, sleeves and thimbles are not listed as included in these configurations.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eWhere it fits your work\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarden and trellis cable loops:\u003c\/strong\u003e prepare matched sleeve terminations for light cable supports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop tethers and retaining cables:\u003c\/strong\u003e make repeatable loop ends for appropriately designed, non-lifting assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall wire leader and tackle assemblies:\u003c\/strong\u003e useful when the wire and sleeve fall within the marked range; select a smaller fishing crimper for finer mono\/fluorocarbon leaders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField repair:\u003c\/strong\u003e portable manual operation suits work away from a bench or air line.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e1608M or 1608B?\u003c\/h3\u003e\n\u003cp\u003eChoose this M family for smaller cable and portability. Choose \u003ca href=\"\/products\/iwiss-iws-1608b-wire-rope-crimping-tool-for-aluminum-loop-sleeves-duplex-oval-cable-ferrules-1-16-to-3-16-c-w-wire-rope-cable-cutter\"\u003eIWS-1608B 24-inch hand swager\u003c\/a\u003e for \u003cstrong\u003e1\/16–3\/16 in.\u003c\/strong\u003e sleeve assemblies and a longer handle format. For repeated preparation at a fixed station, compare \u003ca href=\"\/products\/iwiss-bench-swaging-tool-for-crimping-aluminum-wire-rope-end-sleeve-duplex-oval-sleeves-3-64-in-to-1-8-in-bench-mounted-crimper\"\u003eIWS-1608DT \/ DTS bench swager\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eMatch the cable, sleeve and die before you crimp\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify the fitting:\u003c\/strong\u003e an oval\/duplex sleeve makes a return loop; a stop sleeve has a different function. Match material, wall thickness and dimensions to the tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the actual rope diameter and construction.\u003c\/strong\u003e For coated rope, distinguish the bare metal diameter from the coated outside diameter and follow the fitting supplier's preparation instructions.\u003c\/li\u003e\n\u003cli\u003eSelect the marked groove approved for that cable\/sleeve combination. Follow the prescribed compression count, spacing and sequence; there is no universal crimp count for every sleeve.\u003c\/li\u003e\n\u003cli\u003eInspect for cracks, damaged strands and slipping. Use the fitting maker's specified gauge and acceptance dimensions where required. A hand pull alone does not establish a working load limit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eThe tool's size range is not an assembly load rating.\u003c\/strong\u003e Lifting, fall protection, structural and other safety-critical assemblies require an approved termination system and the specified verification process.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill it crimp a 1\/8-inch stainless steel cable?\u003c\/strong\u003e Cable material alone does not determine compatibility. This tool works on the matched soft-metal sleeve; stainless steel swage studs require a different tool such as \u003ca href=\"\/products\/iws-2316lr-22-inch-stainless-steel-swage-stud-crimper-for-1-8-to-3-16-stainless-steel-wire-rope-tensioners\"\u003eIWS-2316LR 22-inch swage-stud crimper\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use a 3 mm sleeve in a 1\/8-inch groove?\u003c\/strong\u003e Do not select by rounded conversion alone. Confirm the sleeve maker's cable diameter, sleeve geometry and required die before use.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/how-to-use-a-wire-rope-crimping-tool\"\u003eRead our wire rope sleeve selection, swaging and inspection guide\u003c\/a\u003e or \u003ca href=\"\/collections\/wire-rope-crimp-tool\"\u003ecompare tools by application and working method\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"IWS-1608M + CWR35 Cutter Kit","offer_id":43128467095713,"sku":"KIT000001608M35","price":44.99,"currency_code":"USD","in_stock":true},{"title":"IWS-1608M Tool Only","offer_id":48479677710497,"sku":"‎IWS-1608M","price":36.99,"currency_code":"USD","in_stock":true},{"title":"IWS-1608M-C with Built-in Cutter","offer_id":48479677743265,"sku":"‎IWS-1608M-C","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/iCrimp_Wire_Rope_Crimping_Tool_for_Aluminum_Loop_Sleeve_Two_Barrel_Ferrule_Oval_Sleeves_364_in_to_18_in_Swaging_Tool_Kit_with_Wire_Rope_Cutter_1_2.jpg?v=1793597520"},{"product_id":"iwiss-wct322-stainless-steel-cable-tie-gun-for-fastening-and-cutting-up-to-12mm-width-cable-ties-c-w-100-pieces-stainless-steel-cable-zip-ties-zip-tie-release-tool","title":"WCT-322 Stainless Steel Cable Tie Gun — One-Handed, Up to 0.47 in. (12 mm)","description":"\u003cdiv class=\"ic-merged-content\" id=\"ic-metal-tie-guide\" data-content-version=\"tie-selection-20261030\" style=\"font-size:18px;line-height:1.65;max-width:1100px;margin:24px auto;padding:16px;color:#24323c;\"\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eOne-handed tensioning and cutting for everyday installation\u003c\/h2\u003e\n\u003cdiv style=\"background:#f1f6fb;border-left:4px solid #214c83;padding:18px;border-radius:6px\"\u003e\n\u003cp\u003e\u003cstrong\u003eOne-handed operation • Manual tension control • Tool or 100-tie kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA dependable, practical choice for stainless steel zip tie installation. Once the tie is positioned, operate the WCT-322 with one hand to tension it, then use the cutting lever to trim the excess tail. Keep your other hand available to support the bundle or wrap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eCheck your tie size\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;width:38%;padding:12px;border-bottom:1px solid #d8e1e6\"\u003eTie material\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eCompatible stainless steel cable ties\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;width:38%;padding:12px;border-bottom:1px solid #d8e1e6\"\u003eTie width\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eUp to 0.47 in. (12 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;width:38%;padding:12px;border-bottom:1px solid #d8e1e6\"\u003eTie thickness\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eConfirm thickness and locking-head compatibility for your ties.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;width:38%;padding:12px;border-bottom:1px solid #d8e1e6\"\u003eCut-off\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eManual, using the cutting lever\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eCheck the tie's width, thickness, locking head and coating together. Inch dimensions are approximate conversions.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eChoose your tool or starter kit\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/products\/iwiss-wct322-stainless-steel-cable-tie-gun-for-fastening-and-cutting-up-to-12mm-width-cable-ties-c-w-100-pieces-stainless-steel-cable-zip-ties-zip-tie-release-tool?variant=42753369407649\"\u003e\u003cstrong\u003eWCT322 tool option\u003c\/strong\u003e\u003c\/a\u003e: choose this when you already have compatible ties.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/iwiss-wct322-stainless-steel-cable-tie-gun-for-fastening-and-cutting-up-to-12mm-width-cable-ties-c-w-100-pieces-stainless-steel-cable-zip-ties-zip-tie-release-tool?variant=42753369374881\"\u003e\u003cstrong\u003eWCT322KIT\u003c\/strong\u003e\u003c\/a\u003e: tool plus \u003cstrong\u003e100 Type 304 stainless steel ties, 0.18 × 11.8 in. (4.6 × 300 mm)\u003c\/strong\u003e. The supplied ties are narrower than the tool's maximum capacity.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eTension, then trim\u003c\/h2\u003e\n\u003cp\u003eWrap and thread the tie through its lock, load the tail, squeeze the handles to tension, then operate the cutting lever as instructed. Choose sufficient tie length to leave at least \u003cstrong\u003e3 in. (approximately 76 mm) of working tail\u003c\/strong\u003e for the tool.\u003c\/p\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eCan I operate it with one hand?\u003c\/summary\u003e\u003cp\u003eYes. Once the tie is positioned, you can operate the tensioning and cutting controls with one hand. Wrapping and threading the tie are separate preparation steps.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eDoes it cut automatically?\u003c\/summary\u003e\u003cp\u003eYou control the tension and operate the cutting lever yourself. For four tension settings and automatic cut-off, compare LY-600N below.\u003c\/p\u003e\u003c\/details\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eWhere it fits your work\u003c\/h2\u003e\n\u003cp\u003eFor cable routing, equipment maintenance, suitable hose bundling and exhaust-wrap fastening where compatible stainless steel ties are specified.\u003c\/p\u003e\n\u003cp\u003eChoose the tie material and coating for the environment. Follow the application instructions, protect the bundle from over-tightening, and inspect the trimmed end. A cable tie tool does not establish the load rating or approval of the finished assembly.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eCompare cable tie and banding tools\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eChoose for\u003c\/th\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eImportant distinction\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/iwiss-wct322-stainless-steel-cable-tie-gun-for-fastening-and-cutting-up-to-12mm-width-cable-ties-c-w-100-pieces-stainless-steel-cable-zip-ties-zip-tie-release-tool\"\u003eWCT-322\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eUp to 0.47 in. (12 mm); one-handed manual tensioning and cutting\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eManual tensioning and operator-actuated cutting; tool and 100-tie kit options.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/icrimp-wct-319-stainless-steel-cable-tie-gun-for-fastening-cutting-up-to-19mm-ss-zip-ties-c-w-cable-tie-removal-tool\"\u003eWCT-319\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eUp to approx. 3\/4 in. (19 mm); 0.010–0.020 in. (0.25–0.5 mm) thick\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eSide-entry loading; built-in cutter and listed release tool.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/ly-600n-stainless-steel-zip-tie-gun\"\u003eLY-600N\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e0.19–0.31 in. (4.8–7.9 mm) wide; 0.012 in. (0.3 mm) thick\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eFour tension settings with automatic cut-off.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/icrimp-wcb-324-stainless-steel-cable-tie-gun-zip-tie-tool-for-fastening-cutting-up-to-24mm-ss-zip-ties\"\u003eWCB-324\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eCompatible steel band-and-buckle work, up to 24 mm wide\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eSelect the band and buckle system; not a universal substitute for a zip-tie gun.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eThese are alternative tool choices, not a set you need to purchase together. Check tie thickness, locking-head geometry, coating and the current model instructions as well as width.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eGet a compatibility check\u003c\/h2\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eSend the tie or band brand and part number, width, thickness, locking-head or buckle photo, and application to \u003ca href=\"\/pages\/contact\"\u003eproduct support\u003c\/a\u003e. Tell us whether you need a manual cutter or preset-tension automatic cut-off.\u003c\/p\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003e\u003ca href=\"\/pages\/shipping-and-delivery\"\u003eShipping information\u003c\/a\u003e · \u003ca href=\"\/pages\/return-and-refunds\"\u003eReturns and warranty terms\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"iCrimp Tools","offers":[{"title":"WCT322KIT","offer_id":42753369374881,"sku":"WCT322KIT","price":36.99,"currency_code":"USD","in_stock":true},{"title":"WCT322","offer_id":42753369407649,"sku":"WCT322","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/products\/6_e4fb35ca-c49b-494f-a70a-12d752d51117.webp?v=1678773406"},{"product_id":"iwiss-deutsch-crimper-for-dt-dtm-dtp-connectors12-26awg-size-20-16-12-solid-contacts-equivalent-to-hdt-48-00","title":"AWG26-12 Deutsch Crimper for DT, DTM, DTP Connectors, Size 20, 16, 12 Solid Contacts, Equivalent to HDT-48-00","description":"\u003csection id=\"ic-sales-decision-v1\"\u003e\u003ch2\u003eOne adjustable solid-contact tool for varied harness jobs\u003c\/h2\u003e\n\u003cp\u003eFor vehicle and industrial harness work involving multiple compatible solid contact sizes.\u003c\/p\u003e\n\u003ch3\u003eChoose the right configuration\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe HD-2612D listing states AWG 26–12. A connector family's overall capability is not this tool's capability. Confirm the exact contact, positioner setting and wire combination.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eBuild around the contact, not the connector name\u003c\/h3\u003e\n\u003cp\u003eStamped contacts require different tooling. Preparation tools must also cover the selected wire; HS-D2 does not cover the fine-wire end of AWG 26.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/contact\"\u003eGet a model and application check before ordering\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\u003csection id=\"ic-independent-guide\"\u003e\u003ch2\u003eWhat should I check before repairing an existing harness?\u003c\/h2\u003e\n\u003cp\u003eIdentify whether the original contacts are solid or stamped, then record their size and conductor gauge. The housing name alone does not identify the correct tool setting.\u003c\/p\u003e\u003c\/section\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\" class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003ePurpose: HD-2612D Deutsch Crimping Tool is designed crimp Deutsch contacts to appropriate wiring for insertion into Deutsch automotive electrical connectors. Features a fixed positioner for fast crimping.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003eCapability: HD-2612D is capable of crimping solid contacts from 26 to 12 AWG. This crimping range makes it a universal Deutsch crimp tool for Deutsch connectors including DT series(Size 16 Contacts, 14-20AWG), DTM series(Size 20 Contacts, 16-22AWG), DTP series(Size 12, 10-14AWG), as well as HD30, HDP20, DRC, HD10, DRB, STRIKE, Jiffy Splice series.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003e4 Way Indent Crimp: 4 indent, 8 impression crimp result provides a reliable and durable crimp that will stand the test of time when properly executed. Crimp tool ideal for both Deutsch solid contacts and Harting heavy duty connectors.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003eMultiple Crimp Range: Used with both pin and socket contacts, the crimp tool features a simple screw adjustment for height\/contact size, and a dial to select applicable wire sizes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" class=\"a-list-item\"\u003eSecure Connection: The precision ratchet controls cycling of the tool in both directions of handle movement. Ratchet design ensures full crimp is completed. Inspect a first sample against the contact specification before continuing.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003csection id=\"ic-wire-preparation\"\u003e\u003ch2\u003eMatched cutting \u0026amp; stripping tools\u003c\/h2\u003e\n\u003cp\u003eFor HD-2612D wire preparation, choose FSA-0626B for the 26–20 AWG portion or IWE-5 for the compatible 24–12 AWG portion. Follow the exact contact's strip length; the crimper's selector does not determine stripping depth.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:16px\"\u003e\n\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/iwiss-fsa-0626b-wire-stripper-for-0-2-0-8mm-awg-30-20-with-automatic-rebound-spring?variant=42775107666081\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/S9e28b868f7e84b1ab178cbb715644403T-959984.jpg?v=1732520730\" alt=\"FSA-0626B fine-wire stripper\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eFSA-0626B fine-wire stripper\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eChoose the B version for the listed 30–20 AWG fine-wire range. It does not cover 32 AWG or the larger 18–14 AWG end of some crimpers.\u003c\/p\u003e\u003c\/article\u003e\u003carticle style=\"flex:1 1 220px;max-width:360px;border:1px solid #ddd;border-radius:8px;padding:16px\"\u003e\u003ca href=\"\/products\/iwe-5-wire-stripper-cutting-tool-for-0-2-6mm?variant=44890906689697\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/IWISS-IWE-5-Automatic-Wire-Stripper.jpg?v=1743632719\" alt=\"IWE-5 precision wire stripper\" width=\"160\" height=\"160\" loading=\"lazy\" style=\"width:160px;height:160px;object-fit:contain;max-width:100%\"\u003e\u003ch3\u003eIWE-5 precision wire stripper\u003c\/h3\u003e\n\u003cspan\u003eView selected model \u0026amp; current price →\u003c\/span\u003e\u003c\/a\u003e\u003cp\u003eStrips compatible 0.2–6 mm² conductors (listed 24–10 AWG), with an adjustable 5–12 mm length stop. Its side cutter is separately limited to wire diameter up to 2 mm; stripping capacity is not cutting capacity.\u003c\/p\u003e\u003c\/article\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eOptional purchases:\u003c\/strong\u003e check your selected kit contents and skip tools already included or owned. Work on disconnected conductors, test stripping on a sample and use the terminal manufacturer's specified strip length. These accessories are not automatically included with the crimper.\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"‎HD-2612D","offer_id":42738005278881,"sku":"‎HD-2612D","price":132.99,"currency_code":"USD","in_stock":true},{"title":"HD-0812D","offer_id":42738005344417,"sku":"‎HD-0812D","price":139.99,"currency_code":"USD","in_stock":true},{"title":"HD-3220A","offer_id":43274504634529,"sku":"HD-3220A","price":132.99,"currency_code":"USD","in_stock":true},{"title":"‎HD-2612","offer_id":42738005377185,"sku":"‎HD-2612","price":132.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/products\/71mN44rN7mL._AC_SL1500.jpg?v=1661327341"},{"product_id":"kz-19-pneumatic-steel-combination-strapping-tools","title":"KZ-19 Pneumatic Steel Strapping \u0026 Banding Tool — 1\/2, 5\/8, 3\/4 in. (13, 16, 19 mm)","description":"\u003cdiv class=\"ic-powered-guide\" data-content-version=\"air-selection-20261031\" style=\"font-size:16px;line-height:1.65;overflow-wrap:anywhere\"\u003e\n\u003ch2\u003eKZ-19 Pneumatic Steel Strapping Combination Tool\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiCrimp KZ-19 pneumatic steel strapping tool\u003c\/strong\u003e combines \u003cstrong\u003etensioning, metal-seal fastening and cutting\u003c\/strong\u003e for repeat industrial packing. This air-powered steel banding tool is offered in \u003cstrong\u003enominal 1\/2, 5\/8 or 3\/4 in. configurations (13, 16 or 19 mm)\u003c\/strong\u003e. Select the setup that matches your steel strap and seal; each width option is a configuration, not a claim of automatic width adjustment.\u003c\/p\u003e\n\u003cdiv style=\"margin:20px 0;padding:18px;background:#f2f6fb;border-left:4px solid #173f80;border-radius:6px\"\u003e\n\u003cstrong\u003eCheck your setup before ordering\u003c\/strong\u003e\u003cp\u003e\u003cstrong\u003eSteel strap • Compatible metal seals • External compressed air required\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChoose the exact width configuration in the selector. Confirm \u003cstrong\u003estrap width, thickness, steel grade and seal type\u003c\/strong\u003e together. These tools are not for PP\/PET plastic strap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhy choose this setup?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess repeated hand tensioning:\u003c\/strong\u003e pneumatic power handles the pulling stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFewer tool changes:\u003c\/strong\u003e tension, seal and cut using the matched combination tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication-led selection:\u003c\/strong\u003e match the steel band and joint to your actual package and workstation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChoose the right configuration\u003c\/h2\u003e\n\u003ctable style=\"width:100%;table-layout:fixed;border-collapse:collapse\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width:34%;padding:12px;text-align:left;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003eWidth options\u003c\/th\u003e\n\u003ctd style=\"padding:12px;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003e\n\u003cstrong\u003eNominal 1\/2, 5\/8 or 3\/4 in.\u003c\/strong\u003e (13, 16 or 19 mm). Select the required configuration.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width:34%;padding:12px;text-align:left;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003eStrap \u0026amp; joint\u003c\/th\u003e\n\u003ctd style=\"padding:12px;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003eSteel strap with a \u003cstrong\u003ecompatible metal seal\u003c\/strong\u003e. Confirm steel grade and thickness for your selected width before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width:34%;padding:12px;text-align:left;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003eWorking air pressure\u003c\/th\u003e\n\u003ctd style=\"padding:12px;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003e\u003cstrong\u003eApproximately 61–87 psi \/ 4.2–6 bar \/ 0.42–0.6 MPa\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"width:34%;padding:12px;text-align:left;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003eFunctions\u003c\/th\u003e\n\u003ctd style=\"padding:12px;vertical-align:top;white-space:normal;overflow-wrap:anywhere;border-bottom:1px solid #dbe3ed\"\u003ePneumatic tensioning, sealing and cutting in one combination tool.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eWidth options are configurations, not automatic universal compatibility.\u003c\/strong\u003e Confirm any parts or adjustment required to change widths. Inch conversions are approximate; nominal inch categories do not replace actual metric dimensions.\u003c\/p\u003e\n\u003ch2\u003eCheck your air supply\u003c\/h2\u003e\n\u003cdiv style=\"margin:20px 0;padding:18px;background:#f2f6fb;border-left:4px solid #173f80;border-radius:6px\"\u003e\n\u003cp\u003e\u003cstrong\u003eWorking pressure: 61–87 psi \/ 0.42–0.6 MPa.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure alone is not enough:\u003c\/strong\u003e your compressor must also deliver adequate airflow while the tool operates. Tank size and motor horsepower alone do not establish compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir preparation:\u003c\/strong\u003e use filtered, regulated and lubricated compressed air as specified in the supplied manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose sizing:\u003c\/strong\u003e The KZ-19 manual specifies a minimum hose internal diameter of 8 mm (approximately 0.315 in.).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e confirm inlet thread, coupler type and hose connection before ordering; do not assume NPT and BSP fittings interchange.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous or shared use:\u003c\/strong\u003e provide compressor delivery flow, operating pressure, hose length and the number of tools used simultaneously so the installation can be checked.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot sure your compressor is suitable?\u003c\/strong\u003e Email a photo of its nameplate, its air-delivery rating and your selected tool to \u003ca href=\"mailto:sales@iwiss.com?subject=Air%20supply%20check%20%E2%80%94%20KZ-19%20Pneumatic%20Steel%20Strapping%20Tool%20for%2013%2C%2016%20%26%2019%20mm%20Banding\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhere this tool fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel tube, bar and section bundles:\u003c\/strong\u003e check bundle stability, seal position and tool access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate and metal-product packing:\u003c\/strong\u003e check the support surface and edge protection required by your packaging plan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeat industrial dispatch work:\u003c\/strong\u003e arrange the air supply and working position around your packing process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor coils, curved packages or restricted access, send package dimensions and photos before selecting. \u003cstrong\u003eFit depends on tool clearance and joint position, not just the strap width.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePlan a complete workstation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the order contents before purchase.\u003c\/strong\u003e Confirm the selected tool configuration, supplied fittings and any accessories. Steel strap, matching seals, an air source, air-preparation components, hose\/couplers and any balancer must be accounted for; do not assume accessories shown in application material are included.\u003c\/p\u003e\n\u003ch2\u003eFrom setup to a checked joint\u003c\/h2\u003e\n\u003cp\u003eFollow the supplied model-specific manual to prepare the strap and seal, position the tool, tension the band, complete the joint and release the tool. \u003cstrong\u003eInspect a trial joint before starting a batch.\u003c\/strong\u003e For the separate-tool setup, follow the specified cutting\/release procedure.\u003c\/p\u003e\n\u003cp\u003eUse trained operators and appropriate eye and hand protection. Disconnect the air supply before adjustment, cleaning or maintenance. \u003cstrong\u003eStrapping is for packaging, not lifting.\u003c\/strong\u003e Tool tension and joint strength are not finished-package load ratings.\u003c\/p\u003e\n\u003ch2\u003eQuestions before you buy\u003c\/h2\u003e\n\u003cdetails style=\"padding:14px 0;border-bottom:1px solid #dbe3ed\"\u003e\u003csummary style=\"font-weight:700;cursor:pointer\"\u003eDoes this tool need metal seals?\u003c\/summary\u003e\u003cp\u003eYes. Match the seal type and dimensions to the selected tool and steel strap. These KZ tools should not be confused with a sealless steel-strapping tool.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"padding:14px 0;border-bottom:1px solid #dbe3ed\"\u003e\u003csummary style=\"font-weight:700;cursor:pointer\"\u003eWill my existing compressor work?\u003c\/summary\u003e\u003cp\u003eCheck both working pressure and delivered airflow, plus hose and connection sizing. Send the compressor specification and intended workload for a setup check; pressure or tank capacity alone is not sufficient.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"padding:14px 0;border-bottom:1px solid #dbe3ed\"\u003e\u003csummary style=\"font-weight:700;cursor:pointer\"\u003eCan one tool handle every listed width?\u003c\/summary\u003e\u003cp\u003eDo not assume so. Width options may require a different setup or parts. Order the configuration that matches your actual strap.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails style=\"padding:14px 0;border-bottom:1px solid #dbe3ed\"\u003e\u003csummary style=\"font-weight:700;cursor:pointer\"\u003eWhat should I check if tensioning or sealing is poor?\u003c\/summary\u003e\u003cp\u003eStop using an unsatisfactory joint. Check strap\/seal compatibility, working air supply and tool condition against the supplied manual. Disconnect air before servicing; contact us with the model and photos for assistance.\u003c\/p\u003e\u003c\/details\u003e\n\u003csection id=\"ic-powered-comparison-20261029\"\u003e\u003ch2\u003eCompare related tools\u003c\/h2\u003e\n\u003cp\u003eChoose by application and supply requirements. These models are alternatives, not interchangeable tooling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/kz-32-series-pneumatic-steel-combination-strapping-tools\"\u003e\u003cstrong\u003eKZ-32 series steel strappers\u003c\/strong\u003e\u003c\/a\u003e — For selected 19, 32 or 40 mm steel-strapping configurations (≈0.748, 1.260 or 1.575 in.).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/kzl-32-pneumatic-tensioner-kzs-32-pneumatic-strapping-tool\"\u003e\u003cstrong\u003eKZL-32 \/ KZS-32 tensioner \u0026amp; sealer\u003c\/strong\u003e\u003c\/a\u003e — For separate steel-strap tensioning and sealing.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/iwiss-aqd-19-pneumatic-strapper-for-13-19mm-pp-pet\"\u003e\u003cstrong\u003eAQD-19 PP\/PET strapper\u003c\/strong\u003e\u003c\/a\u003e — For PP\/PET plastic banding instead of steel strap.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003ch2\u003eGet a configuration check\u003c\/h2\u003e\n\u003cp\u003eSend \u003cstrong\u003estrap width and thickness, steel grade, seal details, package photos, daily workload and air-supply specifications\u003c\/strong\u003e. Include your chosen model and delivery country\/postcode.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"mailto:sales@iwiss.com\"\u003e\u003cstrong\u003eEmail sales@iwiss.com\u003c\/strong\u003e\u003c\/a\u003e · \u003ca href=\"\/pages\/shipping-and-delivery\"\u003eShipping information\u003c\/a\u003e · \u003ca href=\"\/pages\/return-and-refunds\"\u003eReturns and warranty terms\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003caside class=\"ic-trade-order-note\" style=\"margin:24px 0;padding:18px;border:1px solid #dbe3ed;border-left:4px solid #143c87;border-radius:6px;background:#f6f8fb\"\u003e\u003ch3 style=\"margin:0 0 8px\"\u003eBuying for a crew or workshop?\u003c\/h3\u003e\n\u003cp style=\"margin:0\"\u003eQuantity savings vary by the selected model or accessory. See the applicable quantity offer and confirm savings at checkout. Different products do not combine toward the quantity tiers; a complete kit counts as one unit. \u003ca href=\"\/pages\/wholesale\"\u003eView bulk pricing and request a mixed-order quote\u003c\/a\u003e for your team, workshop or repeat supply needs. Confirm your discount at checkout.\u003c\/p\u003e\u003c\/aside\u003e","brand":"iCrimp","offers":[{"title":"KZ-19 Pneumatic Steel Strapping Tool — 1\/2 in. nominal (13 mm)","offer_id":43272745943201,"sku":"KZ-19","price":999.99,"currency_code":"USD","in_stock":true},{"title":"KZ-19 Pneumatic Steel Strapping Tool — 5\/8 in. nominal (16 mm)","offer_id":43272746008737,"sku":"KZ-19","price":999.99,"currency_code":"USD","in_stock":true},{"title":"KZ-19 Pneumatic Steel Strapping Tool — 3\/4 in. nominal (19 mm)","offer_id":43272746041505,"sku":"KZ-19","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/manualstrappingmachine.png?v=1696578028"},{"product_id":"icrimp-wcb-324-stainless-steel-cable-tie-gun-zip-tie-tool-for-fastening-cutting-up-to-24mm-ss-zip-ties","title":"iCrimp WCB-324 Stainless Steel Banding Tool — Manual Tensioner \u0026 Cutter, Up to 0.94 in. (24 mm)","description":"\u003cdiv class=\"ic-merged-content\" id=\"ic-metal-tie-guide\" data-content-version=\"wcb324-20261031\" style=\"font-size:18px;line-height:1.65;max-width:1100px;margin:24px auto;padding:16px;color:#24323c;\"\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eMore support for demanding steel banding jobs\u003c\/h2\u003e\n\u003cdiv style=\"background:#f1f6fb;border-left:4px solid #214c83;padding:18px;border-radius:6px\"\u003e\n\u003cp\u003e\u003cstrong\u003eBench-supported operation • Tension and cut • Up to 0.94 in. (24 mm)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe iCrimp WCB-324 combines manual steel-band tensioning and cutting in one portable tool. Its convertible body supports handheld positioning and bench-supported operation, helping you steady the tool during suitable tabletop tasks. Use it with compatible steel bands and buckles for pole-mounted brackets, industrial maintenance and other specified fastening applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eA steadier setup for tabletop banding\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConfigure the tool for a stable work surface\u003c\/strong\u003e as shown in the WCB-324 instructions. Supporting the tool on a suitable bench reduces the need for continuous unsupported holding and can make repeated tensioning easier to manage. Allow space for the full handle movement and secure the workpiece appropriately.\u003c\/p\u003e\n\u003cp\u003eFor field installations, use the suitable handheld configuration. Bench support is a workshop advantage; it is not available at every pole or overhead installation.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eTension and trim with one manual tool\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in cutter:\u003c\/strong\u003e trim the excess band tail without switching to a separate cutting tool for that step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual control:\u003c\/strong\u003e operate the tensioning and cutting controls separately to suit the specified installation procedure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo batteries or air supply:\u003c\/strong\u003e take the tool to maintenance and installation jobs without a charger or compressor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible loop sizing:\u003c\/strong\u003e select band length for the actual pole or workpiece circumference, with sufficient allowance for the buckle and tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eCheck the band and buckle before ordering\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eTool type\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eManual stainless steel banding tensioner and cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eMaximum band width\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003e\n\u003cstrong\u003e0.94 in. (24 mm)\u003c\/strong\u003e; inch value is approximate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eBand thickness\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eConfirm compatibility with your band specification before ordering; width alone does not determine fit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eBuckle system\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eCompatible wing-seal and Ear-Lokt-style assemblies, subject to the exact band and buckle requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eOperating configurations\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eHandheld positioning and convertible bench-supported operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" style=\"text-align:left;padding:12px;border-bottom:1px solid #d8e1e6;width:36%\"\u003eCutting control\u003c\/th\u003e\n\u003ctd style=\"padding:12px;border-bottom:1px solid #d8e1e6\"\u003eManual; not preset-tension automatic cut-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eUtility poles, signs and CCTV mounting\u003c\/h2\u003e\n\u003cp\u003eFor compatible band-and-buckle mounting systems, steel banding can be sized around different pole diameters. Typical tasks include \u003cstrong\u003esign brackets, CCTV mounting brackets and specified equipment-box attachments\u003c\/strong\u003e. A suitable band-and-bracket assembly can provide a mounting method without drilling into the pole, where the installation specification permits it.\u003c\/p\u003e\n\u003cp\u003eWCB-324 supplies the tensioning and cutting functions. Match the band, buckle and bracket to the equipment, mounting surface and installation requirements.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eMarine and coastal maintenance\u003c\/h2\u003e\n\u003cp\u003eFor shipboard and coastal maintenance tasks that specify compatible steel banding, WCB-324 offers a portable manual installation option. Potential tasks include \u003cstrong\u003especified cable-support attachments, identification mounts and equipment accessories\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eSelect band and buckle materials for the exposure conditions, and protect cables and finished surfaces where required. Corrosion performance, load capacity and project approval depend on the complete fastening system.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eWorkshop assembly and industrial maintenance\u003c\/h2\u003e\n\u003cp\u003eUse bench-supported positioning for suitable preassembly and repetitive banding tasks. Size compatible bands around approved brackets, workpieces and maintenance components, then tension and trim according to the fastening-system instructions.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eFrom band loop to finished fastening\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePrepare the loop → load and tension → trim → complete the specified buckle lock.\u003c\/strong\u003e Follow the sequence for your exact buckle. Cutting the tail does not complete every fastening system; folding or locking steps may still be required. Inspect the finished assembly and trimmed edges.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px\"\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eDoes WCB-324 support tabletop operation?\u003c\/summary\u003e\u003cp\u003eYes. Its convertible body can be configured for bench-supported banding as shown in the model instructions. Use a stable work surface with adequate operating clearance.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eDoes it automatically cut at a preset tension?\u003c\/summary\u003e\u003cp\u003eNo. Tensioning and cutting are manually controlled.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eCan it install 1-inch-wide banding?\u003c\/summary\u003e\u003cp\u003eThis listing specifies a maximum width of 24 mm, approximately 0.94 in. Do not assume compatibility with 25.4 mm \/ 1-inch banding.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eIs this the same as a stainless steel cable tie gun?\u003c\/summary\u003e\u003cp\u003eWCB-324 is intended for compatible steel band-and-buckle installation. Self-locking metal zip ties have different locking-head and tool requirements; confirm the exact fastening system before substituting tools.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary style=\"padding:14px 0;font-weight:700;cursor:pointer\"\u003eWhat should I order with the tool?\u003c\/summary\u003e\u003cp\u003eChoose compatible steel banding and matching buckles or seals. Pole-mounting jobs also require suitable brackets. Match material, width, thickness and the installation specification rather than choosing accessories by width alone.\u003c\/p\u003e\u003c\/details\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eCompare cable tie and banding tools\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eChoose for\u003c\/th\u003e\n\u003cth style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eImportant distinction\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/iwiss-wct322-stainless-steel-cable-tie-gun-for-fastening-and-cutting-up-to-12mm-width-cable-ties-c-w-100-pieces-stainless-steel-cable-zip-ties-zip-tie-release-tool\"\u003eWCT-322\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eCompatible stainless steel cable ties up to 12 mm wide\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eManual tensioning and operator-actuated cutting; tool and 100-tie kit options.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/icrimp-wct-319-stainless-steel-cable-tie-gun-for-fastening-cutting-up-to-19mm-ss-zip-ties-c-w-cable-tie-removal-tool\"\u003eWCT-319\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eCompatible metal ties up to 19 mm wide; 0.25–0.5 mm thick\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eSide-entry loading; built-in cutter and listed release tool.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/ly-600n-stainless-steel-zip-tie-gun\"\u003eLY-600N\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e4.8–7.9 mm wide, 0.3 mm thick stainless steel ties\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eFour tension settings with automatic cut-off.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003e\u003ca href=\"\/products\/icrimp-wcb-324-stainless-steel-cable-tie-gun-zip-tie-tool-for-fastening-cutting-up-to-24mm-ss-zip-ties\"\u003eWCB-324\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eSteel band-and-buckle work, up to 0.94 in. (24 mm) wide\u003c\/td\u003e\n\u003ctd style=\"padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;font-size:17px;\"\u003eConvertible body for handheld or bench-supported use; manual tensioning and cutting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eThese are alternative tool choices, not a set you need to purchase together. Check tie thickness, locking-head geometry, coating and the current model instructions as well as width.\u003c\/p\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eGet a compatibility check\u003c\/h2\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eSend the tie or band brand and part number, width, thickness, locking-head or buckle photo, and application to \u003ca href=\"\/pages\/contact\"\u003eproduct support\u003c\/a\u003e. Tell us whether you need a manual cutter or preset-tension automatic cut-off.\u003c\/p\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003e\u003ca href=\"\/pages\/shipping-and-delivery\"\u003eShipping information\u003c\/a\u003e · \u003ca href=\"\/pages\/return-and-refunds\"\u003eReturns and warranty terms\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"iCrimp Tools","offers":[{"title":"WCB-324","offer_id":43424837632161,"sku":"WCB-324","price":48.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/0.jpg?v=1700031372"},{"product_id":"battery-cable-lug-crimper-kit-for-awg-8-1-0-electrical-lug-with-63pcs-copper-lugs-25pcs-heat-shrink-tubes-cable-cutter-stripper","title":"IWS-50BN Hex Battery Lug Crimper Kit, 8–1\/0 AWG — Lugs \u0026 Heat Shrink","description":"\u003cdiv class=\"ic-merged-content\" id=\"ic-journey-v2\" style=\"max-width:1100px;margin:24px auto;padding:16px;color:#24323c;font-size:18px;line-height:1.65;overflow-wrap:anywhere;\"\u003e\n\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eStart a battery-cable project with tools and copper lugs\u003c\/h2\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eFor compatible copper-lug cable assembly in vehicle, RV and workshop projects. The crimper lists AWG \u003cstrong\u003e8, 6, 4, 2, 1 and 1\/0\u003c\/strong\u003e. Match the conductor and lug barrel before selecting the die.\u003c\/p\u003e\n\u003ch3 style=\"font-size:21px;line-height:1.35;margin:22px 0 10px;\"\u003eCompare packages\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\" style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003ePackage\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eIncluded items\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eBest starting point\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e\u003ca href=\"\/products\/icrimp-iws-50bn-kit-battery-cable-lug-crimping-tool-kit-for-awg-8-1-0-electrical-lug-with-cable-cutter-stripper?variant=43900087074977\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003eTool only\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eIWS-50BN crimper\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eYou already own suitable cable preparation tools.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e\u003ca href=\"\/products\/icrimp-iws-50bn-kit-battery-cable-lug-crimping-tool-kit-for-awg-8-1-0-electrical-lug-with-cable-cutter-stripper?variant=43682209857697\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003ePreparation kit\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eCrimper, cable cutter and ICP-240 stripper\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eYou need cutting, stripping and crimping tools.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e\u003ca href=\"\/products\/battery-cable-lug-crimper-kit-for-awg-8-1-0-electrical-lug-with-63pcs-copper-lugs-25pcs-heat-shrink-tubes-cable-cutter-stripper\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003e63-lug starter kit\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003ePreparation tools, 63 copper lugs and 25 heat-shrink pieces\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eYou also need the listed starter assortment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003e\u003cstrong\u003eTool capacity and included lugs are different:\u003c\/strong\u003e the 63-piece starter assortment lists AWG 8 through 1, not 1\/0 lugs. Choose stud-hole size separately from conductor size.\u003c\/p\u003e\n\u003ch3 style=\"font-size:21px;line-height:1.35;margin:22px 0 10px;\"\u003ePreparation-tool capacities\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-size:18px;line-height:1.65;\"\u003eThe listed kit cutter covers copper and aluminum cable up to 1\/0 AWG.\u003c\/li\u003e\n\u003cli style=\"font-size:18px;line-height:1.65;\"\u003eThe ICP-240 stripper lists AWG 12 to 4\/0 cable. Adjust and validate stripping on a sample to avoid damaged strands.\u003c\/li\u003e\n\u003cli style=\"font-size:18px;line-height:1.65;\"\u003ePreparation kits already include cutting and stripping tools; buy extras only for a distinct need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdetails style=\"border-bottom:1px solid #d8e1e6;padding:4px 0;\"\u003e\u003csummary style=\"font-size:18px;font-weight:700;cursor:pointer;padding:14px 0;line-height:1.5;\"\u003eView the 63-piece lug and heat-shrink breakdown\u003c\/summary\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\" style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eLug size \/ stud hole\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003eQuantity\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e2 AWG \/ 3\/8 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e4 AWG \/ 3\/8 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e6 AWG \/ 3\/8 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e1 AWG \/ 3\/8 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e2 AWG \/ 5\/16 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e4 AWG \/ 5\/16 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e6 AWG \/ 5\/16 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e8 AWG \/ 5\/16 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e1 AWG \/ 5\/16 inch\u003c\/td\u003e\n\u003ctd style=\"font-size:18px;line-height:1.65;padding:12px;border:1px solid #d8e1e6;text-align:left;vertical-align:top;\"\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003e25 heat-shrink pieces: 15 red 3\/8-inch and 10 black 1\/2-inch, listed 3:1 shrink ratio. Check fit over your finished connection.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #d8e1e6;padding:4px 0;\"\u003e\u003csummary style=\"font-size:18px;font-weight:700;cursor:pointer;padding:14px 0;line-height:1.5;\"\u003eHow many extra lugs should I buy?\u003c\/summary\u003e\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eCount each cable end, then record its conductor size and mounting-stud diameter. Buy refills for those combinations, rather than assuming every lug in an assortment fits every cable.\u003c\/p\u003e\u003c\/details\u003e\u003csection\u003e\u003ch2 style=\"font-size:26px;line-height:1.3;margin:28px 0 12px;\"\u003eCheck your setup before ordering\u003c\/h2\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003eSend the exact tool option, fitting or terminal part number, size and a clear photo to \u003ca href=\"\/pages\/contact\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003eour product-support team\u003c\/a\u003e. For cable tools, include conductor size and insulation diameter.\u003c\/p\u003e\n\u003cp style=\"font-size:18px;line-height:1.65;\"\u003e\u003ca href=\"\/pages\/shipping-and-delivery\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003eShipping and delivery\u003c\/a\u003e · \u003ca href=\"\/pages\/return-and-refunds\" style=\"text-decoration:underline;text-underline-offset:3px;\"\u003eReturns and refund conditions\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\n\u003c\/div\u003e\u003ch3\u003eMatch the cable, terminal and crimper\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eSelect by conductor size, terminal construction and specified crimp profile together.\u003c\/strong\u003e AWG and mm² labels are not interchangeable die markings. Check the terminal part number, barrel dimensions and conductor stranding before ordering. \u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead our US \u0026amp; European cable, lug and crimper selection guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhat this starter kit solves\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eTools and a defined consumable assortment in one package\u003c\/strong\u003e help organize small vehicle, RV and workshop cable projects. Count the actual cable ends and mounting studs before ordering: an assortment is useful only when its wire-size and stud-hole combinations match your job.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThe crimper reaches 1\/0 AWG, but this 63-lug assortment does not supply 1\/0 lugs.\u003c\/strong\u003e Confirm heat-shrink diameter over the finished connection; heat shrink provides covering and identification, not a remedy for a loose crimp.\u003c\/p\u003e\u003ch2\u003eMatch your cable, terminal and tooling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCheck conductor material, AWG or mm² marking, strand construction and lug part number together.\u003c\/strong\u003e A stud-hole diameter identifies the mounting bolt, not the cable size. Fine-stranded battery or welding cable needs a terminal approved for that conductor construction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAWG and metric labels are sizing systems, not US or European certification.\u003c\/strong\u003e Follow the terminal manufacturer's specified die, crimp profile, crimp locations and acceptance criteria. A hex-shaped result alone does not establish DIN or UL compliance.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/battery-cable-lug-crimper-selection-awg-metric-us-europe\"\u003eRead the battery cable, lug and crimper selection guide\u003c\/a\u003e · \u003ca href=\"\/pages\/us-metric-tool-size-guide#wire-size\"\u003eAWG and metric sizing reference\u003c\/a\u003e · \u003ca href=\"\/collections\/battery-lug-crimping-tool\"\u003eCompare all lug crimping tools\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed a fit check?\u003c\/strong\u003e Send the cable marking, terminal part number, side\/end photos and expected daily workload to \u003ca href=\"mailto:sales@iwiss.com\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/p\u003e\u003csection id=\"custom-lug-tooling\"\u003e\u003ch2\u003eCustom Crimping Solutions for Volume Orders\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNeed tooling tailored to your cable lugs and target market?\u003c\/strong\u003e For qualifying order quantities, iCrimp offers professional customization services to better match regional cable-lug specifications and your application’s crimping requirements.\u003c\/p\u003e\n\u003cp\u003eOur team can assess \u003cstrong\u003ecustom die geometry, size markings and tooling configurations\u003c\/strong\u003e against your terminal drawings or samples, conductor construction and required crimp profile. The aim is a better-matched crimping process for consistent, reliable connections.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest an engineering review:\u003c\/strong\u003e send your expected quantity, destination country, applicable standard or customer specification, terminal part number\/drawing, cable material and AWG or mm² size. Include samples or clear photos and any required crimp dimensions or test criteria.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMinimum order quantity, feasibility, development cost and lead time are confirmed per project.\u003c\/strong\u003e Final suitability and any compliance claims depend on the agreed sample evaluation and validation; customization alone does not establish certification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"mailto:sales@iwiss.com?subject=Custom%20Cable%20Lug%20Crimping%20Tool%20Inquiry\"\u003eDiscuss your custom crimping project\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e","brand":"iCrimp Tools","offers":[{"title":"‎IWS-50BN Lug Kit","offer_id":44924306358433,"sku":"‎IWS-50BN Lug Kit","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/1_c1622da5-835c-4fd8-9163-01c8b8f161b5.jpg?v=1781843526"}],"url":"https:\/\/www.icrimptools.com\/collections\/high-selling-electrical.oembed","provider":"iCrimp Tools","version":"1.0","type":"link"}