{"product_id":"iws-0628zmcf-zoomlock-max-acr-press-tool-kit","title":"iCrimp IWS-0628ZMCF ACR Press Tool Kit, ZoomLock MAX Jaw Profile, 7 Sizes","description":"\u003cdiv style=\"font-size:18px;line-height:1.75\"\u003e\n\u003cp style=\"font-size:20px\"\u003e\u003cstrong\u003eChoose this ZM-profile kit for ZoomLock MAX. NOT for RLS or original ZoomLock fittings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection id=\"icrimp-fitting-selector\" style=\"border:2px solid #e66b16;border-radius:8px;padding:20px;margin:18px 0;background:#fffaf4\"\u003e\n\u003ch2 style=\"margin-top:0\"\u003eBefore you buy: original ZoomLock is NOT ZoomLock MAX\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIdentify the refrigerant PRESS FITTING brand and product series—not just the copper tube brand.\u003c\/strong\u003e Read the fitting and packaging markings, then check the part number and tube outside diameter. The word “ZoomLock” alone is not enough to select a jaw profile.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eFitting brand \/ series on your job\u003c\/th\u003e\n\u003cth\u003eiCrimp model to consider\u003c\/th\u003e\n\u003cth\u003eCheck before ordering\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRLS \/ Rapid Locking System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/iws-0625rcf-rls-refrigerant-press-tool-kit\"\u003e\u003cstrong\u003eIWS-0625RCF — RLS profile\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e8 jaw sizes: 1\/4, 5\/16, 3\/8, 1\/2, 5\/8, 3\/4, 7\/8 and 1 in. Not the ZoomLock MAX profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOriginal \/ legacy ZoomLock (not MAX)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eRLS-profile selection route: IWS-0625RCF, after part-number confirmation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOriginal RLS-made ZoomLock fittings belong to the RLS family. Check the RLS cross-reference and send the exact fitting part number for confirmation. Do not select IWS-0628ZMCF simply because “ZoomLock” appears on the box.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParker \/ Sporlan ZoomLock MAX\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/iws-0628zmcf-zoomlock-max-acr-press-tool-kit\"\u003e\u003cstrong\u003eIWS-0628ZMCF — ZM profile\u003c\/strong\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e7 jaw sizes: 1\/4, 3\/8, 1\/2, 5\/8, 3\/4, 7\/8 and 1-1\/8 in. Not the original ZoomLock \/ RLS profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConex Bänninger \u0026gt;B\u0026lt; MaxiPro\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eIWS-0628ZMCF — check the exact series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eListed in the IWISS ZM-model application specification. Confirm the regional fitting series, size and permitted tooling; do not assume every Conex product uses this profile.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eZoomLock PUSH\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNeither press-tool kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eA push-to-connect system, not a press-jaw application.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUnmarked fitting \/ “ZoomLock” without a clear generation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eConfirm before buying\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEmail clear fitting and packaging photos, part number, tube OD and country to \u003ca href=\"mailto:sales@iwiss.com?subject=Refrigerant%20fitting%20identification\"\u003esales@iwiss.com\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eWhy the names cause confusion:\u003c\/strong\u003e RLS originally supplied fittings marketed as ZoomLock through Parker\/Sporlan. RLS later sold under its own brand and announced the end of supply to Parker in August 2020. ZoomLock MAX is a distinct system; a shared historical brand name does not establish interchangeable jaws.\u003c\/p\u003e\n\u003cp\u003eUse the manufacturer's current tooling requirements for the exact fitting. The model guidance above describes IWISS's intended application, not RLS, Parker or Conex Bänninger certification. Brand, series, jaw profile and size must all match.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eIdentification references: \u003ca href=\"https:\/\/rapidlockingsystem.com\/about-rls-hvacr-press-fittings\/rls-history\/\"\u003eRLS brand history\u003c\/a\u003e · \u003ca href=\"https:\/\/rapidlockingsystem.com\/resources\/zoomlock-cross-reference\/\"\u003eOriginal ZoomLock \/ RLS part-number cross-reference\u003c\/a\u003e · \u003ca href=\"https:\/\/discover.parker.com\/ZoomLockMAX\"\u003eParker ZoomLock MAX tooling guidance\u003c\/a\u003e.\u003c\/small\u003e\u003c\/p\u003e\u003c\/section\u003e\n\u003cp\u003e\u003cstrong\u003eIWS-0628ZMCF: a 7-size ACR copper tube press tool kit with ZM-profile jaws.\u003c\/strong\u003e This iCrimp kit brings manual and compatible impact-wrench drive options to refrigerant-line installation and service. Its jaw selection extends to 1-1\/8 in. for technicians planning ACR copper tube connections with the specified fitting system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the fitting system before ordering.\u003c\/strong\u003e IWISS specifies this ZM-jaw model for ZoomLock MAX and \u0026gt;B\u0026lt; MaxiPro copper refrigerant press fittings. Confirm the exact fitting series, tube specification, jaw size and permitted tool combination with the fitting supplier and iCrimp. This description does not claim third-party manufacturer approval, certification or warranty coverage.\u003c\/p\u003e\n\u003ch2\u003eSeven ZM-profile sizes for refrigerant line installation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded jaw sizes:\u003c\/strong\u003e 1\/4 in., 3\/8 in., 1\/2 in., 5\/8 in., 3\/4 in., 7\/8 in., 1-1\/8 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo drive options:\u003c\/strong\u003e operate with the supplied wrench or a compatible impact wrench using the specified drive connection. Impact wrench, battery and charger are not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED completion indication:\u003c\/strong\u003e helps identify the tool's completion condition. It is not a refrigerant leak detector and does not replace joint inspection or system testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable case:\u003c\/strong\u003e keeps the tool, jaws and drive accessories together for transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire-cut jaws with electrophoretic coating:\u003c\/strong\u003e jaw manufacturing and finish as specified by IWISS.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications and kit contents\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable style=\"width:100%;border-collapse:collapse\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eIWS-0628ZMCF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eACR \/ HVAC\/R refrigerant copper tube press connections, subject to system requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eJaw configuration\u003c\/th\u003e\n\u003ctd\u003eZM profile; 7 sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded sizes\u003c\/th\u003e\n\u003ctd\u003e1\/4\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 7\/8\", 1-1\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive accessories\u003c\/th\u003e\n\u003ctd\u003e1 wrench and 1 × 22 mm socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePress tool\u003c\/th\u003e\n\u003ctd\u003e1 wrench-driven press tool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGauge\u003c\/th\u003e\n\u003ctd\u003eNo depth gauge included in this kit configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eCarrying case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eComplete kit weight\u003c\/th\u003e\n\u003ctd\u003e4.15 kg \/ approximately 9.15 lb; not bare-tool weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eFittings, copper tubing, impact wrench, battery, charger, tube cutter, deburring tools and refrigerant commissioning equipment are not included. Measure and mark fitting insertion depth using the fitting manufacturer's prescribed method; obtain any required depth-marking tool separately.\u003c\/p\u003e\n\u003ch2\u003eWhere this tool fits your workflow\u003c\/h2\u003e\n\u003cp\u003eFor air-conditioning contractors and refrigeration installers, this kit offers a compact way to organize ZM-profile pressing equipment for line-set work, equipment connections and service repairs. Mini-split, heat-pump and refrigeration applications depend on the selected fittings, refrigerant and approved installation requirements. Press connections can eliminate the brazing flame at the press joint; they do not eliminate tube preparation, refrigerant recovery or commissioning procedures.\u003c\/p\u003e\n\u003cp\u003eFor restricted-access work, check the full space needed to fit the jaws, operate the drive and release the completed joint. A compact head alone does not establish the minimum working clearance.\u003c\/p\u003e\n\u003ch2\u003eChoose by fitting system and actual tube outside diameter\u003c\/h2\u003e\n\u003cp\u003eACR jaw sizes refer to the specified tube outside diameter. Do not select by a water-pipe nominal size alone: 1\/2 in. nominal copper water pipe and 1\/2 in. OD refrigerant tubing are different sizes. Original RLS-made ZoomLock fittings follow the RLS-family identification route above. Do not interchange that profile with ZoomLock MAX or water-system press fittings.\u003c\/p\u003e\n\n\u003ch2\u003eInstallation planning: prepare, mark, press and check\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the complete system.\u003c\/strong\u003e Verify fitting series, refrigerant, tube material\/temper\/wall, OD and tool\/jaw requirements. Isolate equipment and safely recover refrigerant before opening existing piping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare a sound tube end.\u003c\/strong\u003e Cut square, deburr inside and outside, keep debris out and clean the sealing area as the fitting manufacturer directs. Do not press over damaged, oval or deeply scratched tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect and mark.\u003c\/strong\u003e Check the fitting and seals, then mark the specified insertion depth. Seat the tube fully and retain a visible depth reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlign the correct jaws.\u003c\/strong\u003e Position the matching profile at the prescribed location. Use the drive settings and completion\/release sequence in the IWS-0628ZMCF instructions; do not choose a universal torque or speed setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect and commission.\u003c\/strong\u003e Check insertion, joint appearance and applicable gauge results. Perform the required pressure\/leak tests and evacuation\/decay checks before charging. Follow the equipment and fitting manufacturer's limits rather than a single generic pressure or vacuum target.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eProfessional refrigerant work requires appropriate training, PPE and the procedures applicable to the refrigerant, including flammability controls where relevant. Do not use oxygen to pressure-test refrigerant piping. This overview is a selection aid, not a replacement for the model-specific manual.\u003c\/p\u003e\n\u003ch2\u003eQuestions before you buy\u003c\/h2\u003e\n\u003ch3\u003eDoes the kit include a depth gauge?\u003c\/h3\u003e\n\u003cp\u003eNo. The current kit omits a depth gauge. Insertion depth must still be measured and marked using the fitting system's instructions and a suitable separate measuring or marking tool.\u003c\/p\u003e\n\u003ch3\u003eCan I use any cordless impact wrench?\u003c\/h3\u003e\n\u003cp\u003eNo universal compatibility is claimed. Confirm the specific drive tool, socket suitability and operating settings with iCrimp before use. Manual operation is available with the supplied wrench.\u003c\/p\u003e\n\u003ch3\u003eCan I use this for ProPress water piping or PEX?\u003c\/h3\u003e\n\u003cp\u003eNo water-system or PEX compatibility is claimed for these refrigerant jaws. Choose a tool and jaw configuration intended for that separate connection system.\u003c\/p\u003e\n\u003ch3\u003eDoes ZM mean every ZoomLock or MaxiPro fitting is interchangeable?\u003c\/h3\u003e\n\u003cp\u003eNo. Confirm the exact fitting generation and current permitted tool\/jaw combination for each system. The IWISS application specification is not a claim of Parker or Conex Bänninger certification.\u003c\/p\u003e\n\u003csection id=\"icrimp-refrigerant-tool-recommendations\" style=\"margin:30px 0;font-size:18px;line-height:1.7\"\u003e\u003ch2\u003eChoose related refrigeration tools by connection method\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePressing and swaging are separate jobs.\u003c\/strong\u003e RLS and ZM press kits are alternative fitting-system choices, not interchangeable jaw sets. Expansion tools prepare a socket for the specified joining process, typically a brazed connection; do not expand tubing as a preparation step for a manufactured press fitting unless its instructions expressly require it.\u003c\/p\u003e\n\u003cdiv style=\"display:grid;grid-template-columns:repeat(auto-fit,minmax(min(100%,240px),1fr));gap:18px\"\u003e\n\u003cdiv style=\"border:1px solid #ddd;border-radius:10px;padding:16px;background:#fff\"\u003e\n\u003ca href=\"\/products\/iws-0625rcf-rls-refrigerant-press-tool-kit\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/iws-0625rcf-rls-refrigerant-press-tool-kit.png?v=1793493690\u0026amp;width=480\" alt=\"IWS-0625RCF RLS-profile refrigerant pressing\" loading=\"lazy\" width=\"480\" height=\"480\" style=\"display:block;width:100%;height:190px;object-fit:contain\"\u003e\u003c\/a\u003e\u003cp style=\"font-size:14px;color:#a64015\"\u003e\u003cstrong\u003eRLS-profile refrigerant pressing\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-size:21px\"\u003eIWS-0625RCF\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6\"\u003e8 jaw sizes, 1\/4–1 in. Includes 5\/16 in. and 1 in.; not 1-1\/8 in. Original ZoomLock requires part-number confirmation. Not for ZoomLock MAX.\u003c\/p\u003e\n\u003ca href=\"\/products\/iws-0625rcf-rls-refrigerant-press-tool-kit\"\u003e\u003cstrong\u003eView specifications \u0026amp; choose →\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border:1px solid #ddd;border-radius:10px;padding:16px;background:#fff\"\u003e\n\u003ca href=\"\/products\/iwiss-iws-3814c-copper-swaging-tool-kit-for-expanding-3-8-inch-to-1-1-4-inch-hvac-refrigeration-tubing-with-deburring-tool-and-pipe-cutter\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/3814c.webp?v=1692236931\u0026amp;width=480\" alt=\"IWS-3814C Copper tube expansion \/ swaging\" loading=\"lazy\" width=\"480\" height=\"480\" style=\"display:block;width:100%;height:190px;object-fit:contain\"\u003e\u003c\/a\u003e\u003cp style=\"font-size:14px;color:#a64015\"\u003e\u003cstrong\u003eCopper tube expansion \/ swaging\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-size:21px\"\u003eIWS-3814C\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6\"\u003e8 listed tube sizes, 3\/8–1-1\/4 in. Auto-rotation expansion for suitable tubing; cutter and deburring tool included. Choose this size range when larger heads are unnecessary.\u003c\/p\u003e\n\u003ca href=\"\/products\/iwiss-iws-3814c-copper-swaging-tool-kit-for-expanding-3-8-inch-to-1-1-4-inch-hvac-refrigeration-tubing-with-deburring-tool-and-pipe-cutter\"\u003e\u003cstrong\u003eView specifications \u0026amp; choose →\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"border:1px solid #ddd;border-radius:10px;padding:16px;background:#fff\"\u003e\n\u003ca href=\"\/products\/iws-3858c-pipe-expansion-tool-kit-for-3-8-to-1-5-8-hvac-refrigeration-tubing-with-deburring-tool-and-pipe-cutter\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/1_cdbd19cf-da37-42dc-b628-c68baf3f767f.jpg?v=1740732105\u0026amp;width=480\" alt=\"IWS-3858C Extended-range copper tube expansion\" loading=\"lazy\" width=\"480\" height=\"480\" style=\"display:block;width:100%;height:190px;object-fit:contain\"\u003e\u003c\/a\u003e\u003cp style=\"font-size:14px;color:#a64015\"\u003e\u003cstrong\u003eExtended-range copper tube expansion\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-size:21px\"\u003eIWS-3858C\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6\"\u003e11 listed tube sizes, 3\/8–1-5\/8 in. 30° auto-rotating head. Cutter and deburring tool included; the included cutter only covers up to 1-1\/4 in., so larger tubing needs a suitable separate cutter.\u003c\/p\u003e\n\u003ca href=\"\/products\/iws-3858c-pipe-expansion-tool-kit-for-3-8-to-1-5-8-hvac-refrigeration-tubing-with-deburring-tool-and-pipe-cutter\"\u003e\u003cstrong\u003eView specifications \u0026amp; choose →\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eConsider an expander only if your workload also includes suitable swaged\/brazed joints. It is not required to use this press kit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/blogs\/crimping\/copper-pipe-pressing-vs-refrigeration-tube-swaging-hvac-guide\"\u003eRead the refrigerant pressing and copper tube swaging guide\u003c\/a\u003e · \u003ca href=\"\/collections\/hvac-refrigeration-tubing-tools\"\u003eBrowse HVAC \u0026amp; refrigeration tubing tools\u003c\/a\u003e\u003c\/p\u003e\u003c\/section\u003e\u003ch2\u003eLearn more and get help choosing\u003c\/h2\u003e\n\u003cp\u003eRead our \u003ca href=\"\/blogs\/crimping\/copper-pipe-pressing-vs-refrigeration-tube-swaging-hvac-guide\"\u003erefrigerant press tool selection and installation guide\u003c\/a\u003e for system distinctions, practical checks and the separate role of copper tube swaging. For model selection, email \u003ca href=\"mailto:sales@iwiss.com?subject=IWS-0628ZMCF%20selection%20help\"\u003esales@iwiss.com\u003c\/a\u003e with your fitting brand\/series, tube OD, refrigerant and intended drive tool.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eiCrimp is a brand of IWISS. Third-party brand names identify fitting systems only; no affiliation or endorsement is implied. Consult the \u003ca href=\"https:\/\/discover.parker.com\/ZoomLockMAX\"\u003efitting manufacturer's technical guidance\u003c\/a\u003e alongside the iCrimp instructions.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"iCrimp","offers":[{"title":"Default Title","offer_id":48488604926113,"sku":"IWS-0628ZMCF","price":319.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0617\/9169\/9105\/files\/iws-0628zmcf-zoomlock-max-acr-press-tool-kit.png?v=1793526606","url":"https:\/\/www.icrimptools.com\/products\/iws-0628zmcf-zoomlock-max-acr-press-tool-kit","provider":"iCrimp Tools","version":"1.0","type":"link"}