Skip to content
Fast Domestic and Global Shipment
Fast Domestic and Global Shipment
Stainless Steel Zip Tie Tools

How Can I Use a Stainless Steel Zip Tie Tool?

Stainless steel zip ties or metal cable ties are widely used in various industrial and DIY projects and particular applications. It is stronger and more durable than its plastic counterparts and, therefore, helpful in fixing cables, pipes, and other materials where harsh conditions prevail. However, a stainless steel zip tie tool is needed to fix these ties correctly and effectively. This article will explore different types of stainless steel zip tie tools, their features, and how to use a metal zip tie tool to get the most effective and professional results.

What is a Stainless Steel Zip Tie Tool?

A Stainless steel zip tie tool, or Metallic zip tie tool as it is commonly known, is a tool for handling stainless steel zip ties by tightening and cutting them. These tools, such as the iCrimp LY-600N Stainless Steel Zip Tie Gun For Fastening & Cutting up, ensure that the zip ties are fastened and cut efficiently for safety and meet the standard appearance required in industries.

Types of Metal Zip Tie Tools

  • Manual Cutters

These basic models represent safety razors with the most moderate design, including the cutting blade and handle. It is convenient to use them, and more to the point, they are cost-friendly.

  • Automatic Cutters

These tools are designed with a handle that, when pulled, triggers a blade that slices off this zip tie. It provides quicker and more preferably slicing than other modes of cutting. A good example is the iCrimp WCT-319 Stainless Steel Cable Tie Gun

Features of Metal Zip Tie

  • Cutting Blade: The blade should be sharp and long-lasting to make a clean cut that will not fray the zip tie. It can trim the overall length of the zip tie to the desired tension at a point of use and gives a neat end.
  • Handle: It should be possible to hold it conveniently, and it must afford a good grip for wielding the cutting tool.
  • Material: These tools are made from stainless steel because the material is hard to wear and corrosion-resistant.
  • Size: Select the right tool depending on the size of the zip tie you wish to use. It enables you to slide the head to change the pressure level on the zip-tied object without harming it.

Guide to Using a Stainless Steel Zip Tie Tool

Step 1: Prepare the Zip

  • Select the Right Size: Select a stainless steel zip tie based on the size and load of items you wish to tie with it in the form of a zip tie. Stainless steel ties may be bought in various lengths and widths, so choose one suitable for your use.
  • Wrap the Zip Tie: Spiral the zip tie around the objects you would like to hold; enter the flat end through the lock head of the tie. Tug the tie by hand to reduce any loose loops or slackness.

Step 2: Place on the Zip Tie Into the Tool

  • Load the Tool: This process inserts the free end of the zip tie into the stainless steel zip tie tool slot. Ensure the tie is correctly placed within the tool's tensioning means.
  • Position the Tool: Position the tool down the tie to the locking head. Ensure that the tool lies parallel to the tie to have a uniform tension.

Step 3: Tension the Zip-Tie

  • Apply Tension: Squeeze the handle of the zip tie and keep on doing so until the needed tension is achieved. The tool’s tension control scale of the instrument helps achieve uniform tension.
  • Proper Tightening: Do not over-tighten the zip tie to the point of stretching, as this might damage the material or even affect the efficiency of the zip tie.

Step 4: Trim the Remains of the Zip Tie

  • Trim the Tie: After the tie has been tensioned, how the tool is designed would cut the rest of the length of the tie. Twist the handle till it clicks to show that the extra has been trimmed.
  • Inspect the Cut: Look at the end of the tie and cut it to a smooth surface. When the tie is being designed, there must not be edges that are sharp or excess material sticking from the tie.

Step 5: Final Check

  • Inspect the Installation: The securely fastened zip tie and the secured items should be attached firmly. The tie should be substantial but not to the extent that it is too tight to the material used.
  • Test for Security: Pull the tied zip a little on the secured items to ensure the tie is tight.

Tips for Using a Metal Zip Tie Tool

  • Safety First: Using a metal zip tie tool results in cuts; therefore, it is advised that one wear a pair of gloves while using the tool.
  • Avoid Overtightening: Over-tightening may result in wear and tear on the zip tie or the object used to fasten.
  • Choose the Right Size: The correct zip tie type looks professional and gives maximum protection.
  • Maintain Your Tool: Occasionally cleaning and checking the tool ensures it works optimally.

Read more: What Can I Use Steel Cable Ties For?

Bottom line

Installing the stainless steel zip tie tool is simple, providing dependable, solid, and hygienic fixings. Knowing the various kinds available in the market, the characteristics, and the right way to use the metal zip tie, Whether in an industrial environment or simple do-it-your-self tasks of straining cables, pipes, or other materials, getting the best results will not be far from your dreams. Secure your projects with confidence and accuracy. Choose from iCrimp's wide range of metal zip-tie tools and ensure your installations last.


References

nelcoproducts.com

abb.com

te.com

krympslang.nu

luckinslive.com

Previous article Do I Need a Special Tool for Metal Zip Ties?
Next article How Can I Crimp a Ferrule Connector?

Listen to this article

0:00

Product List

View All Products

Product Reviews