Side-entry loading and one-handed operation for wider ties
Up to 3/4 in. (19 mm) โข Side-entry loading โข Built-in cutter
Install wider stainless steel zip ties with a hand-operated tensioning and cutting tool. Side-entry loading lets you position the tail without feeding its full length through a closed tool body. Once positioned, tension the tie and operate the cutting lever with one hand.
Check your tie size
| Tie material |
Compatible stainless steel cable ties |
| Tie width |
Up to approximately 3/4 in. (19 mm) |
| Tie thickness |
0.010โ0.020 in. (0.25โ0.5 mm) |
| Cut-off |
Manual, using the cutting lever |
Check the tie's width, thickness, locking head and coating together. Inch dimensions are approximate conversions.
Choose your package
WCT-319: complete cable tie tool with the listed tie-release tool.
WCT-319 KIT: tool, release tool and 100 stainless steel ties. The 19 mm capacity describes the tool; it does not mean the supplied ties are 19 mm wide. Ask us for supplied-tie dimensions if your job requires a specific size.
Load from the side. Tension. Cut.
Wrap and thread the compatible tie through its lock. Position the tail in the side-entry tool, tension with the handle, then operate the cutting lever as instructed. The handheld controls let you decide when to cut.
Can I operate it with one hand?
Yes, once the tie is positioned. Side-entry loading and the thumb-operated cutting lever support convenient handheld installation.
Can the release tool remove every metal tie?
It assists removal of compatible locking ties. Match the lock design and follow the release instructions; whether a removed tie may be reused depends on its design and condition.
Where it fits your work
For cable routing, equipment maintenance, suitable hose bundling and exhaust-wrap fastening where compatible stainless steel ties are specified.
Choose the tie material and coating for the environment. Follow the application instructions, protect the bundle from over-tightening, and inspect the trimmed end. A cable tie tool does not establish the load rating or approval of the finished assembly.
Compare cable tie and banding tools
| Model |
Choose for |
Important distinction |
| WCT-322 |
Up to 0.47 in. (12 mm); one-handed manual tensioning and cutting |
Manual tensioning and operator-actuated cutting; tool and 100-tie kit options. |
| WCT-319 |
Up to approx. 3/4 in. (19 mm); 0.010โ0.020 in. (0.25โ0.5 mm) thick |
Side-entry loading; built-in cutter and listed release tool. |
| LY-600N |
0.19โ0.31 in. (4.8โ7.9 mm) wide; 0.012 in. (0.3 mm) thick |
Four tension settings with automatic cut-off. |
| WCB-324 |
Compatible steel band-and-buckle work, up to 24 mm wide |
Select the band and buckle system; not a universal substitute for a zip-tie gun. |
These are alternative tool choices, not a set you need to purchase together. Check tie thickness, locking-head geometry, coating and the current model instructions as well as width.
Get a compatibility check
Send the tie or band brand and part number, width, thickness, locking-head or buckle photo, and application to product support. Tell us whether you need a manual cutter or preset-tension automatic cut-off.
Shipping information ยท Returns and warranty terms
