Skip to content

Manuals & Tool Resources

Find product specifications, application guides and available instruction PDFs by model. PDF links below are existing IWISS documents; confirm that the model on the document matches your tool. Resource index updated 28 October 2026.

KIT-DC01

Solid-contact and stamped-contact tooling; check the individual tools against your exact contact part number.

KIT-DC01 and KIT-DC02 have different contents. Contact size is not AWG.

Product specifications & optionsOpen KIT-DC01 Instruction.pdfFind a demonstration

ICP-240

Radial cable stripper with two extra blades.

Listed AWG 12–4/0 cable range; check cable diameter and jacket construction.

Product specifications & optionsRequest model-specific instructionsFind a demonstration

KIT-0535

Ratcheting crimper, cutter/stripper, six die sets and storage case.

Die-specific ranges apply. The 2 AWG endpoint refers to ferrules, not battery lugs.

Product specifications & optionsRequest model-specific instructionsFind a demonstration

IWS-0840S

Lug crimper, three interchangeable die sets, radial stripper and carrying case. Lugs and heat shrink not included.

Listed crimp sizes: 8, 6, 4, 2, 1, 1/0, 2/0, 3/0 and 4/0 AWG. Match the lug barrel.

Product specifications & optionsOpen IWS-0840S Manual.pdfFind a demonstration

IWS-1608B-CWR60

IWS-1608B swager and CWR60 wire rope cutter.

Listed sleeve range: 1/16–3/16 inch. Match sleeve material and rope construction.

Product specifications & optionsRequest model-specific instructionsFind a demonstration

WCT322KIT

WCT-322 tool plus 100 Type 304 ties, 4.6 × 300 mm.

Tool capacity is up to 12 mm tie width; supplied ties are 4.6 mm wide.

Product specifications & optionsOpen WCT322 Maunal.pdfFind a demonstration

IWS-1632AF-ZL-7

Manual press tool with seven jaw sizes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 inch.

Listed legacy ZoomLock application; not ZoomLock MAX.

Product specifications & optionsOpen IWS-1632AF-Z-7 Manual.pdfFind a demonstration

KIT-1960D

Expansion tool, expansion heads, PEX cutter, ring-removal tool, lubricant and case.

Check the head configuration and specified expansion tubing, rings and fittings.

Product specifications & optionsRequest model-specific instructionsFind a demonstration

PC-CRP1096

Clamp/removal tool, cutter, twenty 1/2-inch clamps, ten 3/4-inch clamps and case.

Tool range 3/8–1 inch; starter clamps cover only 1/2 and 3/4 inch.

Product specifications & optionsRequest model-specific instructionsFind a demonstration

IWS-1632CF

Press tool; 1/2, 3/4 and 1-inch jaws; tubing cutter; socket wrench. Impact wrench not included.

Copper press fittings: confirm fitting series, jaw profile and drive-tool clearance.

Product specifications & optionsOpen IWS-1632CF Manual.pdfFind a demonstration

More instruction PDFs

Browse the existing instruction library

Browse the product catalogue