European V-profile copper pressing in four metric sizes
15, 18, 22 and 28 mm · socket-wrench or compatible powered drive · cutter and carry case. The IWS-1632CF-EU is a compact copper pipe press kit for matched European V-profile press fittings. Select by the fitting manufacturer's required profile and actual tube outside diameter.
What is included
- IWS-1632CF-EU press tool.
- V15, V18, V22 and V28 interchangeable jaws for 15, 18, 22 and 28 mm tube sizes.
- Socket wrench, copper tubing cutter and molded carrying case, as pictured.
A powered driver and copper fittings are not included. The 12, 14 and 16 mm jaws mentioned by the supplier are additional options, not part of this four-size kit.
Two ways to drive the press
Use the included socket wrench for manual operation or a compatible powered drive in accordance with the tool instructions. The short tool body and rubber grip support positioning where long handles are awkward. Support and align the tool squarely on the fitting before pressing.
Specifications
| Model |
IWS-1632CF-EU — European metric version |
| Jaw profile |
V |
| Included tube sizes |
15 / 18 / 22 / 28 mm outside diameter |
| Tool length |
33.3 cm / approximately 13.1 in. |
| Tool weight |
1.39 kg / approximately 3.06 lb; tool weight, not shipping weight |
Choose the correct fitting system
This is the European V-profile kit. Metric 15, 18, 22 and 28 mm jaws are different sizes from the 1/2, 3/4 and 1 inch jaws on the US-version kit. Do not substitute one version for the other. A shared fitting brand name alone does not establish compatibility; check profile, size, tube specification and tool approval for the exact fitting system.
Before the first press
Cut the tube square, deburr it, check the fitting seal and mark insertion depth. Fit the matching jaw and follow the tool and fitting instructions for the complete press cycle. Inspect and test the finished installation as required by the fitting supplier.
Does this kit include an electric press machine?
No. It is a mechanically driven press tool supplied with a socket wrench. A compatible powered driver is separate.
Is this the same as the US IWS-1632CF?
No. This independent listing is for the European V-profile kit with 15, 18, 22 and 28 mm jaws. View the US 1/2, 3/4 and 1 inch kit.
Check your fitting and jaw compatibility · Browse plumbing tools
