Build a serviceable Weather Pack harness
WP-404 is a 404-piece assortment of 1-, 2- and 3-way housings, terminals and silicone wire seals. Its listed terminal assortment spans 22–12 AWG; each individual terminal and seal has a narrower fit requirement. The number in the kit name counts components, not completed connector pairs.
Where it fits
For compatible automotive accessory wiring, motorcycle repairs, agricultural machinery and outdoor equipment harnesses. Choose a removable connector where future service matters. Verify the exact assembly's environmental and electrical requirements for marine or exposed locations; no universal waterproof rating is implied.
Match three components before crimping
- Housing: cavity count, mating shape and latch must match the other half.
- Terminal: choose the conductor range and mating pin/socket geometry.
- Wire seal: match insulation outside diameter, not wire gauge alone. Seal unused cavities with the appropriate plugs.
Choose the Weather Pack tool
IWC-1424B Weather Pack crimper has separate conductor and seal-forming stations. Its listed 24–14 AWG range covers only matching contacts within that range: do not use it for this assortment's 12 AWG terminals. For 12 AWG, request the exact terminal/seal tooling specification. Select the B option, not the A or AN option, on the linked product page.
Assembly sequence
- Isolate power, identify each circuit and check wire, terminal, seal and housing compatibility.
- Slide the correct seal over the wire before terminating it; strip to the terminal drawing without nicking strands.
- Locate the bare conductor in the conductor wings and the seal in its support wings.
- With IWC-1424B, form the conductor and seal support in separate operations using their specified cavities. Avoid crushing or cutting the seal.
- Inspect the sample crimp and retention. Insert into the correct housing cavity, engage the required locks and mate the connector.
- Support the harness, check pinout and perform the specified electrical and mechanical checks before service.
Common buying questions
Can I use a Deutsch solid-pin crimper?
No. This is a stamped-terminal and separate-seal workflow; a solid-contact indent tool is a different system.
Does the larger piece count mean more finished connectors?
Count the housings, pins, sockets and seals needed for your chosen cavity arrangements. An assortment may not contain equal numbers of every combination.
Read the Weather Pack installation and tool-selection guide.
For a fit check, email sales@iwiss.com with the contact or lug part number, wire gauge, insulation diameter, mating connector and clear photos. For repeat workshop orders, also include quantities and your validated tool setting.
Wire preparation before crimping
FSA-0626 wire stripper lists 22–10 AWG and is a preparation option for compatible wire within that range. Its 0.6–2.6 mm marking is diameter, not mm² conductor area. Use the exact contact's strip length, verify a sample for strand damage and skip an extra stripper if suitable preparation tooling is already included or owned.
Know your tool. Choose with confidence.
Amazon feedback across IWISS & iCrimp — 50,000+ reviews across our brands. See our brand-level rating, reporting date and scope on About Us; these are separate from reviews for this product. Brand feedback & support
Specialists in connection tools
Buy from the official iCrimp and IWISS retail store. iCrimp is a brand of IWISS USA INC, backed by connection-tool design and manufacturing expertise.
Meet iCrimpGet help matching your application
Send your terminal or fitting part number, size and a photo. Our team can help you check the tool selection before you order.
Email product supportClear support after purchase
US warehouse stock and international delivery are available for eligible orders. Check delivery to your country, return conditions and the 12-month tool warranty before buying.
Returns & warranty terms · Shipping detailsDesign standards & application compatibility
Check the exact model, connection type and applicable standard before ordering. A standard referenced in a product description is not, by itself, evidence of third-party certification. Ask us for model-specific documentation if your project requires it.
Design references are not third-party product certifications. Use the model specifications and the fitting or terminal manufacturer's instructions to confirm compatibility.
How manufacturing supports reliability
IWISS manufacturing capabilities include precision machining, heat treatment, assembly and quality inspection, with dimensional measurement and tensile-testing equipment. The inspection method and acceptance criteria depend on the tool and connection application.
Ask us about the specifications or supporting documentation for your model.
Manufacturing & innovationNeed technical documents?
For instructions, compatibility details or available test documentation, email the model number and your application to sales@iwiss.com.
Connector and terminal selection
Identify the connector series, contact construction and wire size before choosing an assortment.
Before ordering
- Match housing and contact part numbers; cavity count alone does not establish compatibility.
- Check conductor size, insulation diameter, seals and the required crimping tool.
Does the piece count mean complete connector sets?
Not necessarily. Housings, contacts, seals and accessories may each count as individual pieces. Check the selected pack's contents before ordering.
What should I send for a fit check?
Send the product model, cable or pipe size, connector or fitting part number, and clear photos. Include the intended application so our team can help you identify the appropriate setup.
Product details in pictures
Images may show different kit configurations. Check your selected option and its listed contents before ordering.



